Bedienungsanleitung Bestron A1500SR (Seite 25 von 40) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

546687

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

User’s instructions

English

6. Close the bottom flap, and press until it clicks into place.

7. Fit the dust receptacle onto the appliance, and click it into position.

CLEANING AND MAINTENANCE - Cleaning or replacing the HEPA filter

For best results clean or replace the HEPA filter after every second or third use of the vacuum cleaner, or

more frequently if the filter is visibly blocked.

Clean the HEPA filter regularly to avoid that the filter becomes clogged and the engine overheated.

1. Remove the waste from the dust receptacle

(see “Removing waste from the dust receptacle”).

2. Turn the cover/filter from the dust receptacle.

3. Turn the HEPA filter anti-clockwise to release it,

and then remove it from the cover.

4. Rinse both thoroughly in lukewarm water.

5. Allow the HEPA filter and the holder to dry

thoroughly.

6. Fit the holder and HEPA filter to the dust

receptacle in the reverse sequence. If necessary,

replace the HEPA filter.

Figure 7

• Water could penetrate into the appliance if the filter is not thoroughly dry. This could result in

(electrical) damage.

• Do not clean the filter in a washing machine.

• Do not dry the filter with a hairdryer.

CLEANING AND MAINTENANCE - Cleaning or replacing the exhaust filter

Replace the exhaust filter at least twice a year, and more frequently if the

filter isvisibly blocked.

1. Remove the plug from the wall socket.

2. Open the exhaust-filter cover by pulling on the lip on the cover.

Remove the exhaust filter from the appliance, see Figure 8.

3. Rinse the filter in lukewarm water. Allow it to dry thoroughly.

4. Return the cleaned filter to the appliance. Close the cover, and press

until it clicks into place.

Figure 8

Water could penetrate into the appliance if the filters are not thoroughly dry. This could result in

(electrical) damage.

GUARANTEE TERMS

The importer guarantees the appliance against defects caused by manufacturing and/or material faults for

60 months from the date of purchase, subject to the following conditions.

1. No charges will be made for labour costs or materials during the warranty period. Any repairs carried

out during the warranty period do not extend the warranty period.

2. The importer automatically becomes the owner of any faulty parts that he replaces or a faulty

appliance (in the event of replacement of the appliance).

3. All claims submitted under warranty must be accompanied by the original bill of sale.

4. Claims under warranty must be submitted to the dealer where the appliance was purchased or to the

importer.

5. The warranty is issued solely to the first purchaser and cannot be transferred.

6. The warranty does not cover damage caused by:

a. Accidents, incorrect use, wear and/or neglect.

b. Faulty installation and/or use in a manner contravening the prevailing legal, technical or safety

regulations.

c. Connection to a mains voltage other than the voltage specified on the type plate.

d. Unauthorized modifications.

e. Repairs carried out by third parties.

f. Careless transport, i.e. without suitable packaging materials or protection.

7. No claims may be made under this warranty for:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bestron A1500SR Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info