Bedienungsanleitung Bestron A2300E (Seite 23 von 40) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

546557

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

User’s instructions

English

7. Press the button on the telescopic tubes and keep it pressed in; you

can then extend or retract the tubes to the required length. See Figure 3b.

8. Press the foot button on the nozzle to set the combi nozzle for use on

hard or soft surfaces, see Figure 3c. For use on hard surfaces, press the

foot button on the combi nozzle to extend the brushes. Lift the button for

use on soft surfaces.

Note For wooden flors we reccomend you to use the special hard

floor brush

Figure 3

ACCESSORIES

This vacuum cleaner is supplied with 2 accessories (16):

• a combined accessory

- with a crevice tool with a narrow nozzle, which you can use to

clean radiators, window frames, crevices, small openings,

and similar;

- with a dusting brush, which you can use to clean delicate or

irregular surfaces, furniture, Venetian blinds, and similar.

• a furniture nozzle Figure 4

OPERATION - Storage after use

1. Remove the plug from the wall socket.

2. Press the rewind button (13) and keep it pressed in; the

power cord will automatically rewind onto the reel.

Guide the power cord whilst it rewinds onto the reel,

since otherwise the cord could become tangled or the

plug could strike the back of the appliance. Take hold

of the power cord near the mark, and allow it to gently

slide through your fingers back into the appliance, see

Figure 5. Figure 5

3. Stand the vacuum cleaner upright. Retract the telescopic tube completely. An attachment slot for

the telescopic tube is fitted to the bottom of the vacuum cleaner, next to the front castor (12)

(see Figure 6). Slide the bottom of the accessory bracket into the slot.

An attachment slot for the combi nozzle is fitted to

the back of the vacuum cleaner. Slide the bottom of

the combi nozzle into the slot

This avoids the need to dismantle the vacuum

cleaner after use; you can store the assembled

appliance and retrieve it again quickly when you

need it.

Figure 6

CLEANING AND MAINTENANCE

1. Clean the outer surface of all parts with a damp cloth and a cleaner suitable for plastics. Make sure no

moisture gets into the appliance.

2. Over the course of time dust and dirt can accumulate around the wheel axles, thereby preventing the

wheels from turning easily. Consequently they should be kept clean.

• Never immerse the appliance, plug or power cord in water.

• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)

to clean the appliance.

CLEANING AND MAINTENANCE - Changing the dust bag

1. Change the dust bag immediately once the ‘dust bag full’ indicator (15) turns red, see Figure 7.

It is possible that the indicator turns red whilst the dust bag is not yet full. If so, then the nozzle, hose or

tubes may be blocked. These will then need to be cleaned.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bestron A2300E Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info