Bedienungsanleitung Bestron ACL258 (Seite 20 von 36) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

546830

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

User’s instructions

English

OPERATION - Using for the first time

Before using the iron for the first time begin by ironing a piece of old fabric to verify that the soleplate and

water reservoir are clean. Repeat this when the iron has not been used for a period of time.

The appliance may emit a little smoke and a characteristic smell when you switch it on for the first time.

This is normal, and will soon stop. Make sure the appliance has sufficient ventilation.

OPERATION - Selecting the mains voltage

1. Verify that the mains voltage is in agreement with one of the two voltages

specified on the appliance’s type plate. Do not use the appliance if this is

not the case.

2. Set the mains-voltage switch to the required position: 115 Volt or 230 Volt

(see figure 2).

Figure 2

Selecting the mains voltage

OPERATION - Filling the reservoir with water

1. Fold the handle outwards. When folding the handle outwards, a

clicking noise must be heard to indicate that the handle is secure.

2. Use one hand to move the slide backwards and use your other

hand to carefully remove the water reservoir (see figure 3).

3. Remove the plug from the water reservoir and fill the reservoir

with clean tap water.

4. Fit the plug to the water reservoir.

5. Dry the exterior of the water reservoir with a dry cloth.

6. Place the water reservoir back on the iron. When replacing the

reservoir, a clicking noise must be heard to indicate that the

reservoir is secure.

The plug must be removed from the socket-outlet before the

water reservoir is filled with water.

Figure 3 Removing the water reservoir

OPERATION - Dry ironing

1. Insert the plug into the plug socket.

2. Turn the temperature-control dial to the required position (see ‘Ironing instructions’).

3. Stand the iron upright.

4. Iron the fabric by sliding the iron over the fabric. While you are ironing the heating element will

automatically switch on and o. to maintain the soleplate at the set temperature.

5. When you have .nished ironing turn the temperature-control dial to the lowest position, remove the

plug from the wall socket, and stand the iron upright to allow it to cool.

OPERATION - Steam ironing

The water reservoir must not be opened whilst you are ironing!

1. Fill the water reservoir with water (see ‘Filling the reservoir with water’).

2. Insert the plug into the plug socket.

3. Turn the temperature-control dial to the required position within the

‘steam range’ (see ‘Ironing instructions’).

4. Stand the iron upright.

5. Iron the fabric by sliding the iron over the fabric.

6. While you are ironing you can press the steam button .rmly to give a shot

of steam (see Figure 4).

7. When you have .nished ironing turn the temperature-control dial to the

lowest position, remove the plug from the wall socket, and stand the iron

upright to allow it to cool.

Figure 4 Using a steam shot

115V

230V

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bestron ACL258 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info