Bedienungsanleitung Bestron AES1000CO (Seite 28 von 48) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

702334

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

OPERATION - Making espresso

1. Move the filter holder from the machine by turning it clockwise to the “

” position. Remove the

filter from the filter holder and add grinded coffee to the filter with the measuring spoon (17). Press the

grinded coffee powder lightly with the convex side of the measuring spoon.

2. Place the filter back into the filter holder, make sure the notch is aligned with the groove. Then place

the filter holder in the machine, fasten the filter holder by turning counter-clockwise to the “

”

position.

3. Then pour the hot water (from preheating) from the expresso cup(s). Then place the warm espresso

cup or cups on the drip pan.

4. When the ready-for-use keeps lighting up white, turn the selection button to the “

” position. After a

few moments, the espresso will be poured into your espresso cup.

5. Turn the selection button to the “ ” position when you have the desired quantity of espresso, or when

the colour of the espresso is clearly getting lighter. Your espresso is ready.

6. Press the ON/OFF button to turn off the machine.

7. After you are done making an espresso, you can turn the filter holder clockwise to the “

” position

and then remove the remainder. Keep the locking clip (7) pressed to the filter to make sure the filter

does not fall out of the filter holder.

8. Let the filter holder and filter cool down completely and then rinse under running water.

ATTENTION:

• During operation, the metal parts get hot.

• During continuous use, the ready-for-use light probably will not keep lighting up because of the lower

temperature. This does not mean the machine stops working, you can keep making coffee despite the

lower temperature.

• Do not leave the coffee machine unattended when making coffee, because you have to stop the

process manually!

• Empty the dripping tray regularly to prevent overflowing.

• Place the machine on a stable, even underground.

• Pull the plug from the socket if you do not use the machine.

OPERATION - Frothing milk/Making cappuccino

To make cappuccino, you add frothing milk to the espresso.

1. First make espresso (see “Making espresso”) in a mug with minimal content of 180 ml.

2. Turn the selection button to the “ ” position” and wait till the ready-for-use keeps lighting up white.

3. Fill a can with around 100 ml milk.

Place the protective pipe (15) around 2 cm into the milk and turn the selection button to the “ ”

position, until steam is coming from the steam pipe (14). Froth the milk by moving the can up and down

in a rotating movement.

5. When the milk has been frothed sufficiently, you have to turn the selection button to the “ ” position.

6. Pour the frothed milk in the cup. The cappuccino is ready.

7. Press the ON/OFF button to turn the machine off.

ATTENTION:

• Make sure you work carefully, because hot steam can lead to burns.

• The recommended diameter for the milk frothing can is 70 mm or more. The milk doubles in volume

during frothing.

• Clean the steam pipe (14) and the protective pipe (15) right after use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bestron AES1000CO Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info