Bedienungsanleitung Bestron AKS700SD (Seite 16 von 20) (Deutsch, Englisch, Holländisch, Französisch)

546769

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

User’s instructions

English

OPERATION - Before use

1. The factory has already placed a battery in the

appliance. Remove the sticker from the battery

compartment at the bottom of the device before use

(see figure 2).

2. Place the device on a solid flat surface.

3. Turn on the device by pressing the on/off button

(see figure 1, nr. 4). Wait until the LCD-display has

settled.

4. Select the weighing system of your choice by

pressing the Unit button (5). In the display (1) shows

a dash alternating under g (European measuring

system) and lb:oz (British/American measuring

system).

5. You can turn off the device by pressing the on/off button.

The device switches itself off when it’s not used for 2 minutes. The appliance will remember your choice

of system after switch-off.

OPERATION - Weighing

1. Place the device on a solid flat surface.

2. Optionally, you can place a bowl on the weighing plateau (3) for adding all the ingredients. Always do this

before you turn on the device.

3. Turn on the device by pressing the on/off button (4). Wait until the LCD-display has settled.

4. Start the weighing by placing the ingredients on the plateau (or bowl). The display shows the weight now.

You can weigh up to 5 kg max.

OPERATION - Water volume measurement

1. Place the device on a solid flat surface.

2. Place a bowl on the weighing plateau (3) for adding the water. Always do this before you turn on the

device.

3. Turn on the device by pressing the on/off button (4). Wait until the LCD-display has settled.

4. Press the mode button (2) until there are dashes under ml (fl. oz) and water.

5. Pour the water in the bowl. The display shows the amount of water now.

OPERATION - Milk volume measurement

1. Place the device on a solid flat surface.

2. Place a bowl on the weighing plateau (3) for adding the milk. Always do this before you turn on the

device.

3. Turn on the device by pressing the on/off button (4). Wait until the LCD-display has settled.

4. Press the mode button until there are dashes under ml (fl. oz) and milk.

5. Pour the milk in the bowl. The display shows the amount of milk now.

OPERATION - TARE function

When you want to weigh multiple products after another without emptying the scales, you can use the tare

function:

1. Place the device on a solid flat surface.

2. Optionally, you can place a bowl on the weighing plateau (3) for adding all the ingredients. Always do this

before you turn on the device.

3. Turn on the device by pressing the on/off button (4). Wait until the LCD-display has settled.

4. Place the first ingredients on the weighing plateau (or in the bowl). The display shows the weight now.

5. Now press the Zero-button (4) to reset the value in the display to zero.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bestron AKS700SD Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info