Bedienungsanleitung Bestron DBB2200E (Seite 24 von 40) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

546665

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

User’s instructions

English

3. Stand the vacuum cleaner upright. An attachment slot for the accessory bracket

is fitted to the back of the vacuum cleaner next to the front castor see Figure 10.

Slide the bottom of the accessory bracket into the slot. This avoids the need to

dismantle the vacuum cleaner after use; you can store the assembled appliance

and retrieve it again quickly when you need it.

Figure 10 Storing the vacuum cleaner

CLEANING AND MAINTENANCE - Cleaning

1. Clean the outer surface of all parts with a damp cloth and a cleaner suitable for plastics. Make sure no

moisture gets into the appliance.

2. Over the course of time dust and dirt can accumulate around the wheel axles, thereby preventing the

wheels from turning easily. Consequently they should be kept clean.

• Never immerse the appliance, plug or power cord in water.

• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)

to clean the appliance.

CLEANING AND MAINTENANCE - Changing the dust bag

Change the dust bag immediately once the ‘dust bag full’ indicator turns red, see

Figure 11.

It is possible that the indicator turns red whilst the dust bag is not yet full. If so,

then the nozzle, hose or tubes may be blocked. These will then need to be

unblocked.

1. Open the cover by pulling the cover release (dust bag) upwards. Remove the

dust bag from the holder, and dispose of it in a dustbin.

2. Fit a new dust bag in the holder with the arrow pointing downwards, and press

into position.

3. Press the cover until it clicks into place. Figure 11 Changing the dust bag

Make sure that the dust bag does not become pinched by the cover. This could damage the appliance

and/or the dust bag.

Note Dust bags for this vacuum cleaner are available from every major hardware store, with a statement

of the type number Bestron D00016/D0016S.

CLEANING AND MAINTENANCE - Cleaning or replacing the motor safety filter

Clean or replace the motor safety filter at least twice a year, and more frequently if the filter is visibly

blocked.

1. Remove the plug from the wall socket.

2. Remove the hose from the vacuum cleaner.

3. Open the cover by pulling the cover release (dust bag) upwards.

4. Remove the dust bag, see Figure 11.

5. Remove the holder for the motor safety filter from the vacuum cleaner, see

Figure 12.

6. Pull the motor safety filter from the holder.

7. Dispose of the filter, or wash it in lukewarm water. Allow it to dry thoroughly.

8. Return the cleaned or new filter to its holder, and return the holder to the

vacuum cleaner.

9. Fit the dust receptacle back into the holder. Press the cover until it clicks into

place.

Figure 12 Removing the motor safety filter

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bestron DBB2200E Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info