Bedienungsanleitung Bestron DS2200E (Seite 24 von 40) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

546556

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

User’s instructions

English

CLEANING AND MAINTENANCE - Changing the dust bag

1. Change the dust bag immediately once the ‘dust bag full’ indicator

turns red, see Figure 7.

It is possible that the indicator turns red whilst the dust bag is not yet full.

If so, then the nozzle, hose or tubes may be blocked. These will then

need to be cleaned.

2. Open the cover by pulling the cover release (dust bag) upwards.

Remove the dust bag from the holder, and dispose of it in a dustbin.

3. Fit a new dust bag in the holder and press into position.

4. Close the cover, and press until it clicks into place. Figure 7

Make sure that the dust bag does not become pinched by the cover. This could damage the appliance

and/or the dust bag.

Note Dust bags for this vacuum cleaner are available from every major hardware store, with a statement

of the type number Bestron D00013/D0013S

CLEANING AND MAINTENANCE - Cleaning or replacing the motor safety filter

Clean or replace the motor safety filter at least twice a year, and more

frequently if the filter is visibly blocked.

1. Remove the plug from the wall socket.

2. Remove the hose from the vacuum cleaner.

3. Open the cover by pulling the cover release (dust bag) upwards.

Remove the dust bag, see Figure 7. Remove the motor safety filter

holder, located behind the dust bag: see Figure 8.

4. Dispose of the filter, or wash it in lukewarm water. Allow it to dry

thoroughly.

5. Return the cleaned or new filter to its holder, and fit the holder in the

appliance. Fit a dust bag. Close the cover, and press until it clicks into Figure 8

place.

• Water could penetrate into the appliance if the filter is not thoroughly dry. This could result in

(electrical) damage.

• Make sure that the dust bag does not become pinched by the cover. This could damage the

appliance and/or the dust bag.

CLEANING AND MAINTENANCE - Replacing the exhaust filter

Replace the exhaust filter at least twice a year, and more frequently if the filter is

visibly blocked.

1. Remove the plug from the wall socket.

2. Open the exhaust-filter cover by pulling on the lip on the cover. Remove the

exhaust filter from the appliance, see Figure 9.

3. Rinse the filter in lukewarm water. Allow it to dry thoroughly.

4. Return the cleaned filter to the appliance. Close the cover, and press until it

clicks into place. Figure 8

• Water could penetrate into the appliance if the filter is not thoroughly dry. This could result in

(electrical) damage.

• The cover cannot be closed if a dust bag is not fitted, or is not fitted correctly.

• Make sure that the dust bag does not become pinched between the cover and the housing. This

could damage the appliance and/or the dust bag.

TECHNICAL DETAILS

Type: DS2200E

Power consumption: 2200W max

Mains Voltage: 230V ~50Hz

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bestron DS2200E Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info