Bedienungsanleitung Bestway 56217 My First Frame (Seite 1 von 44) (Alle Sprachen)

686194

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

56217

Item Aged

Over 2 years

MY FIRST FRAME POOL

OWNER’S MANUAL

• Only for domestic use.

• Only for outdoor use.

• Children can drown in very small amounts of water. Empty the pool

when not in use.

• Do not install the paddling pool over concrete, asphalt or any other

hard surface.

• Place the product on a level surface at least 2 m from any structure

or obstruction such as a fence, garage, house, overhanging

branches, laundry lines or electrical wires.

• Recommend back towards the sun when playing.

• Modification by the consumer of the original paddling pool (for

example the addition of accessories) shall be carried out according

to the instructions of the manufacturer.

• Keep assembly and installation instruction for future reference.

Structure photo:

＋

Drawings may not reflect actual product, not scaled to size.

Preparation

Installation of small swimming pool usually takes only 10 minutes with

1 people.

Recommendations regarding placement of the pool:

• It is essential the pool is set up on solid, level ground. If the pool is

set up on uneven ground it can cause collapse of the pool and

flooding, causing serious personal injury and/or damage to personal

property. Setting up on uneven ground will void the warranty and

service claims.

• Do not set up on driveways, decks, platforms, gravel or asphalt.

Ground should be firm enough to withstand the pressure of the

water; mud, sand, soft / loose soil or tar are not suitable.

• The ground must be cleared of all objects and debris including

stones and twigs.

• Check with your local city council for by-laws relating to fencing,

barriers, lighting and safety requirements and ensure you comply

with all laws.

Installation

Assembly can be completed without tools.

NOTE: It is important to assemble pool in the order shown below.

Adult assembly required.

1. Find solid, level ground and clear it of debris.

Attention: Do not set up the pool under cables or under trees.

2. Spread out the pool and make sure it is right side up.

3. Cover the water valve.

4. Assemble the top rails. Connect Top Rail A to Top Rail B, and

slide into the pole sleeve (Fig.1). Please see the structure photo

for detailed directions. Make sure the top rails’ ends are in right

position.

Ref#

Top Rail A

Top Rail B

Vertical Pool Leg

Corner

Footing

Description

Pool Size & Quantity

1.22 m x 1.22 m x 30.5 cm

(48’’ x 48’’ x 12’’)

Fig. 1 Fig. 2

Fig. 3 Fig. 4

Refer to the item name or number stated on the packaging.

Packaging must be read carefully and kept for future reference.

B A

Liner Underwater adhesive repair

patch

Parts:

WARNING

Never leave your child unattended – drowning hazard.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bestway 56217 My First Frame Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bestway 56217 My First Frame

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info