Bedienungsanleitung Bestway 60047 Lay-Z Spa (Seite 19 von 340) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Finnisch)

752495

Zoom out

Zoom in

Vorherige Seite

1/340

Nächste Seite

Ambient Temperature

10ºC(50ºF)

15ºC(59ºF)

20ºC(68ºF)

25ºC(77ºF)

30ºC(86ºF)

Water Temperature

10ºC(50ºF)

15ºC(59ºF)

20ºC(68ºF)

25ºC(77ºF)

30ºC(86ºF)

Set Temperature

40ºC(104ºF)

Heating Duration

15.5 h

12 h

10 h

8 h

5 h

IMPORTANT

To reach 40°C (104°F), the heating duration required is based on the starting water

temperature and ambient temperature, the data below is purely for reference. To

display the current water temperature, run the filter system for at least a minute.

Power Rate Massage Tube Power Heat Element Power Water Pump Power

2,000W at 20ºC 50W

220-240V AC,

50Hz, Single Phase

2,050W at 20ºC 800W

• Be sure to cover the spa with the spa

cover whenever the heating function is

activated. Leaving the spa uncovered

will increase the heating duration

required.

• When the spa is assembled with water,

do not switch off the spa heater if the

temperature is lower than 6ºC(42.8°F).

HEATING RESET

When using the Lay-Z-SPA for first time, or after a long period of

inactivity, be sure to press the reset button on the pump using a

small and thin object. Reset

If the temperature on the control panel (or the water temperature)

has not changed 4-5 hours after activation of the heating system,

use a thin object to press the RESET BUTTON, and restart the heating system.

IMPORTANT: The heating system will not operate if the outside temperature is

above 40ºC (104 ºF) or if the Lay-Z-SPA is under direct sunlight. Under these

conditions, please wait until a cooler time of day before pressing the RESET

BUTTON with a thin object and restarting the heating system.

•

You can keep the spa on during winter when the temperature is lower than 6°C

(42.8°F)

The Freeze Shield™ system automatically keeps the water temperature between

6°C

(42.8°F)

and 10°C

(50°F)

, and it will prevent the water from freezing.

Important:

If the water temperature is below 6°C

(42.8°F)

, the spa heater must always

be on. In this mode, the Freeze Shield™ system can keep the internal temperature

between 6°C

(42.8°F)

and 10°C

(50°F)

to prevent damage, such as water freezing in the

pipes or the circulation system.

Important:

If the Freeze Shield™ system isn’t working, alarms will pop up on the spa.

Be sure to check the status of your spa if the outdoor temperature is below

6°C

(42.8°F)

. In case of a long-term absence from home when there is a risk of

temperatures falling below 6°C

(42.8°F)

, we strongly suggest disassembling the spa and

storing it following the storage procedure.

•

Any damage as a result of using the spa in these conditions is the responsibility of the

customer. Do not use the spa when the ambient temperature reaches -10°C(14°F).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bestway 60047 Lay-Z Spa Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info