Bedienungsanleitung Bestway 60081 Lay-Z-Spa (Seite 19 von 356) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Finnisch)

752496

Zoom out

Zoom in

Vorherige Seite

1/356

Nächste Seite

A. LOCK/UNLOCK BUTTON: The pump has a 5-minute auto-lock, this

light will turn on. To lock or unlock the pump, place a finger over the

lock/unlock button for 3 seconds.

C. HEAT BUTTON: Use this button to activate the heating system. When

the light above the heat button is red, the heating system is activated.

When the light is green, the water is at the set temperature and the

heating system is at rest.

NOTE: If the heating system is activated the filtration system will

automatically start.

NOTE: After turning off the heating system the filtration system will

continue to operate.

NOTE: If the spa heater is on when the water temperature is below

6ºC(42.8°F), the heating system will warm the water until 10ºC(50°F)

automatically.

B. POWER-SAVING TIMER BUTTON: Designed to help avoid wasting

power by setting the time and duration of the heating cycle for the spa.

This way, you can enjoy your spa at the time you desire, without needing

to leave the heater on at all times.

D. MASSAGE SYSTEM BUTTON: Use this button to activate the

massage system, which has a 30-minute auto-shutoff feature. The light

above the Massage System Button displays red when activated.

IMPORTANT: Do not run the Massage system when the cover is

STEP 1: Set the heating duration

1. Press the button unit the LED starts to flash.

2. Press the or button to adjust the heating duration (From 1-999 hours).

3. Press the button again to confirm the heating duration.

STEP 2: Set the number of hours FROM NOW when the heater will activate

1. After setting the heating duration, the LED starts to flash.

2. Press the or button to adjust the hours until time of activation (From 0-999 hours).

3. Press button again or simply touch nothing for 10 seconds to confirm the setting. The

LED will light steadily, and the countdown to heater activation will begin.

To modify the timer settings: Press the button and use the or button to adjust.

Cancel the setting: Press the button for 2 seconds.

NOTE: After setting, the screen flashes the current temperature and time alternately.

NOTE: Timer adjustment (amount of time with the heater ON) may be set from 1 to 999 hours;

Reservation time adjustment (the number of hours FROM NOW when the heater will begin to

function) may be set from 0 to 999 hours. If the timer is set at 0 hour, the heating system will

activate immediately.

Note that the timer is one time per use - the user sets the duration of the heating cycle, and

how many hours from now the heating cycle begins. The timer does NOT repeat until reset.

USING THE SPA

attached. Air can accumulate inside the spa and cause irreparable

damage to the cover and bodily harm.

NOTE: Heat and massage system work together to create a warm

massage experience.

2-LEVEL MASSAGE REGULATION: Push once full power massage,

push again for 50% power, push again to shut off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bestway 60081 Lay-Z-Spa Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info