Bedienungsanleitung Bestway SaluSpa (Seite 7 von 28) (Englisch)

784589

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

SPA SUCTION FITTING INSTRUCTIONS

When installing and using this equipment, basic safety precautions shall always be

followed, including the following:

IMPORTANT SAFETY INSTRUCTIONS

READ, FOLLOW, AND UNDERSTAND ALL

INSTRUCTIONS AND WARNINGS.

• Any modification that increases the flow rate of the circulation system shall require

re-evaluation of the cover/grate and sump to ensure that the flow rating of the Suction

Outlet Fitting Assembly (SOFA) is not exceeded.

• Missing, broken, or cracked cover/grates, sumps, mud-frames, or any other SOFA

component shall be replaced before bathers are allowed to use the pool.

• Loose cover/grates shall be reattached before bathers are allowed to use the pool.

1. Replace suction fittings every 3 years.

2. The use of adhesives or other attachment methods that prevent access to suction

piping or SOFA components requiring periodic servicing is prohibited.

3. Refer to the following diagram for each SOFA component part instructions:

4. Any field modification made to a SOFA not authorized by the manufacturer’s installation

instructions shall void the SOFA certification.

• No modification shall be made to a SOFA structure or flow path unless the new

configuration has been certified as new SOFA.

• Cover/grates and all other SOFA components shall be replaced at or before the end of

their service life and that service life begins the month and year in which a SOFA

component is installed with or without water.

5. Winterizing instructions. Dry the suction fittings completely，and store the product in a

dry room at a storage temperature of 59ºF~104°F

(

°C

~40

°C)

• Cover/grate, including fasteners, shall be observed for damage or tampering each

operational day.

• Missing, broken, or cracked cover/grates shall be replaced before bathers are allowed

to use the pool.

• Loose cover/grates and associated components shall be reattached before bathers are

allowed to use the pool.

• SOFA components and fastener receptacles shall be clean and free of debris or

obstructions during installation of cover/grate and fasteners.

• Remember to hand-check cover/grate for snugness to the sump/ frame after

installation.

6. Before using the product, please check the integrity of the head of the suction fitting. If

the product is broken, please do not use it.

7. All SOFAs shall be installed in accordance with the manufacturer’s installation

instructions.

• No modification shall be made to a SOFA structure or flow path unless the new

configuration has been certified to the original SOFA.

• These SOFA-configuration specific flow ratings NOT be exceeded at any time the pool

is open to bathers.

• Cover/grates, when installed, shall not protrude more than 2 in. (51 mm) from the

finished surface of the pool in which the SOFA is installed.

Please research and download General Certificate of Conformity through

www.bestwaycorp.com

SAVE THESE INSTRUCTIONS

Installation Information label (Copy)

Manufacturers name: Bestway (Nantong) Recreation Corp.

Cover part number: S01

Life expectancy: 3 Years

Cover flow rating: 20 GPM

Configuration and installed orientation: Wall

Location: Spa Pool liner

Date of installation:_______________

Installer need to fill in the balance of information and give it to the pool owner, to

be kept with other important pool related documents.

1. Indoor Installation:

Be aware of special requirements if you install the spa indoors.

• Humidity is a natural side effect with SaluSpa installation. First determine the

effects of moisture on exposed wood, paper, etc. in the proposed location. To

minimize these effects, it is best to provide plenty of ventilation to the selected

area. An architect can help determine if more ventilation is needed.

2. Outdoor Installation:

• During filling, draining or when in use, water may spill out of the spa. Therefore the

SaluSpa should be installed near a floor drain.

• Do not leave the spa surface exposed to direct sunlight for long periods of time.

SELECTED LOCATION

IMPORTANT:

Due to the combined weight of the SaluSpa, water, and users, it is

extremely important that the surface where the SaluSpa is installed

is smooth, flat, level and capable of supporting the weight for the entire time the

SaluSpa is installed (not on the carpet or other similar material). If the SaluSpa is

placed on a surface which does not meet these requirements, any damage caused

by improper support is not covered under the manufacturer’s warranty. It is the

responsibility of the SaluSpa owner to assure the integrity of the surface at all times.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bestway SaluSpa Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info