470366
13
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
13
Positioning cuff
Bare your left wrist, making sure that the circulation in the
arm is not restricted by any clothes etc. that are too tight.
Position the cuff on the inside of your wrist.
Fasten the cuff with the Velcro fastening so that the upper
edge of the monitor is positioned approx. 1 cm below the
ball of your thumb.
The cuff has to be fitted tightly around the wristbut should
not constrict it.
Important: The instrument should only be operated with the
original cuff.
Correct posture
Rest for approx. 5 minutes before each measurement.
Otherwise there may be divergences.
You can perform the measurement
either sitting or lying down. It is es-
sential to support your arm and have it
at an angle. Always make sure that the
cuff is level with your heart. Otherwise
there may be serious divergences. Relax your arm and the
palms of your hands.
In order not to distort the result, it is important to keep still
during the measurement and not talk.
Measuring blood pressure
Start the blood pressure monitor with the start/stop but-
ton
. A beep and a brief display of all the symbols con-
firm that the device is switched on.
Before the measurement, the last saved test result is briefly
displayed. If there is no measurement in the memory, the
instrument always displays the value “0”.
The cuff is pumped up to 190 mmHg. Cuff air pressure is
released slowly.
If a tendency towards high blood pressure is already de-
tectable, the cuff is pumped up again and cuff pressure
increased further
. The pulse symbol flashes
tectable, the cuff is pumped up again and cuff pressure
as soon
as a pulse is found.
After the pressure has been completely reduced, the
systolic pressure, diastolic pressure and pulse readings
are displayed.
Measuring can be cancelled at any time by pressing the
start/stop button
.
“Er_” appears if it has not been possible to perform the
measurement properly. Observe the section in these in-
structions on error messages/troubleshooting and repeat
the measurement.
The test result is saved automatically.
1
2 3
W
HO
SYS
mm
H
g
DIA
mm
H
g
PUL
/min
1 cm
• • • • • • • • • •
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Beurer BC 44 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Beurer BC 44

Beurer BC 44 Bedienungsanleitung - Holländisch - 8 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info