Bedienungsanleitung Beurer BF 180 (Seite 11 von 60) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

715958

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

1.2 General notes

• Not intended for medical or commercial use.

• Please note that measuring tolerances are possible due to technical reasons because the scale has not been

calibrated.

• Ages 10 to 99 years and height settings from 100 to 220 cm (3-03” to 7-03”) can be preset. Load capacity: max.

180 kg (396 lb, 28 st). Result in steps of 100g (0.2 lb, 1/4 st). Measurements of body fat, body water and muscle

density in steps of 0.1%.

• The caloric requirements is speciﬁed in steps of 1 kcal.

• When supplied to the customer, the scale is set to weigh and measure in "kg" and "cm".

On the back of the scale, there is a toggle button where you can select "pounds" (lb) and

"stones" (st).

•

Place the scale on a ﬁrm level ﬂoor; a ﬁrm ﬂoor covering is required for correct measurement.

• Protect the scale against hard knocks, moisture, dust, chemicals, major temperature ﬂuc-

tuations and heat sources which are too close (stove, heating radiator).

• Repairs may only be carried out by customer service or authorized dealers. Before submitting any complaint,

ﬁrst check the batteries and replace them if necessary.

2. Operation

2.1 Batteries

If present, pull the battery insulating strip o the battery compartment cover or remove the bat-

tery’s protective ﬁlm and insert the battery according to the polarity. If the scale fails to operate,

remove the battery completely and insert it again. Your scale is equipped with a “replace battery”

indicator. When the scale is operated with a battery which is too weak, “Lo” appears in the display

ﬁeld and the scale automatically switches o. In this case the batteries must be replaced (2x CR

2032).

2.2 Measuring weight only

Step onto the scale. Stand still with your weight distributed equally on both feet. The scale begins

to take measurements straight away. If the display appears continuously, the measurement has

ﬁnished.

If you step o the weighing area, the scale switches o after a few seconds.

2.3 Setting user data

To measure your body fat percentage and other physical data, you must enter your personal user para meters.

The scale has 10 memory positions in which you and other members of your family can save and recall personal

settings. Please note that the memory begins with 1.

Switch on the scale (tap the standing surface). Wait until the display shows “0.0”.

Then press “SET”. The ﬁrst memory position will appear ﬂashing on the display. Now you can enter the following

settings:

Memory position 1 to 10

Body size 100 to 220 cm (3‘-03“ to 7‘-03“)

Age 10 to 99 years

Sex

male (

), female ( )

Degree of activity 1 to 5

– Modifying values: Press

or or press and hold for more rapid progress.

– Conﬁrming entries: Press the “SET” button.

– After the values have been set and displayed again, “0.0” appears on the display together with the symbol for

the selected gender

/ .

– Then the scale is ready for measuring. If you do not carry out a measurement, the scale switches o automati-

cally after several seconds.

UNIT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beurer BF 180 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info