Bedienungsanleitung Beurer BY 90 (Seite 18 von 92) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

715718

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

9� This baby scale has a ‘HOLD’ function (AUTO HOLD and MECHANICAL HOLD)� The AUTO

HOLD function (which is activated as standard) establishes the baby's weight on the display

as soon as they are still enough to achieve an exact measured value� If the baby is moving

around vigorously, their weight cannot be recorded� Therefore, try to calm the wriggling baby

to achieve a rapid measurement, but do not touch the baby, as this will aect the weight

measurement� As soon as the baby's weight is established on the display, the word ‘HOLD’

stops ﬂashing and the weight is displayed for 120 seconds�

Note: If the weight cannot be determined automatically after 8 seconds, the baby scale

averages the weight over 4 seconds (ﬂashing display of the weight on the baby scale display)�

10� The weight is saved on the baby scale and it switches o automatically after 120 seconds�

To switch o the scale manually, press and hold the ON/OFF/TARE button for 3 seconds�

11�

If the baby is wriggling about too vigorously, you can select the MECHANICAL HOLD

function by pressing the HOLD button� After 5 seconds, the word ‘HOLD’ stops ﬂashing

and the averaged weight is displayed for 120 seconds�

12�

To transfer the measured weight to the app, open the app and press the

Bluetooth

button

after the measurement has successfully been taken�

13�

The baby scale automatically switches o once the transfer has been completed successfully�

Initial use without the app

We recommend using the "beurer BabyCare" app for the initial use and implementing all

settings (see "Initial use with the app" section)�

Note: Measurements that are saved on the baby scale without it having been previously

synchronised with the app cannot be transferred�

1�

Place the baby scale on an even, hard surface; a hard surface is crucial for correct

measurement�

2� Press the ON/OFF/TARE button to switch on the baby scale�

"app" ﬂashes on the

display for 120 seconds� Press any button to use the baby scale without the app�

3�

As soon as "0,000 kg" appears on the display, the baby scale is ready to take measurements�

4� Now place the baby on the weighing surface� Do this very carefully; do not let the baby fall

and take particular care with the baby's head�

5� The weight is displayed for 120 seconds and then it switches o automatically� Press the

ON/OFF/TARE button

to take another measurement� To switch o the scale manually,

press and hold the

ON/OFF/TARE button

for 3 seconds�

Subsequent synchronisation with the app

If you have not synchronised the baby scale with the "beurer BabyCare" app during initial

use, you can also do this later�

1� Press the ON/OFF/TARE button to switch on the baby scale�

2�

"App" ﬂashes on the display of the baby scale for 10 seconds� If the app is open, the baby

scale can be connected for 10 seconds�

Alternatively:

Press the

Bluetooth

button

whilst the baby scale is in operation� If the app is open,

the baby scale can be connected for 120 seconds�

3�

The baby scale is successfully connected to the app once the Bluetooth® symbol

illuminates permanently in the display�

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beurer BY 90 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info