Bedienungsanleitung Beurer EM 49 (Seite 36 von 148) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

715863

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

The battery symbol is shown. How to proceed:

Replace all batteries.

You have an unpleasant sensation at the electrodes. How to

proceed:

(1)

The electrodes are not positioned correctly. Check their positions

and re-position, if necessary.

(2)

The electrodes are worn. This may cause irritated skin as even

distribution of the current across the entire area is no longer

guaranteed. For this reason, replace the electrodes.

Skin in the treatment area turns red. How to proceed:

Immediately stop treatment and wait until your skin has returned to its

normal condition. If the redness is under the electrode and disappears

quickly, there is no risk – this is caused by the locally stimulated,

increased blood flow.

However, consult your doctor before you continue treatment if the

skin irritation persists and this is accompanied by an itchy sensation

or inflammation. This may be caused by an allergic reaction to the

adhesive surface.

13. Replacement parts and wearing parts

You can obtain the following replacement parts directly from

Customer Services:

Designation Item number and/or order number

8 x adhesive electrodes

(45 x 45 mm)

Item 661.02

4 x adhesive electrodes

(50 x 100 mm)

Item 661.01

14. Technical specifications

Name and model EM 49

Type EM 49

Output waveform Biphasic rectangular pulse

Pulse length 50 – 450 µs

Pulse frequency 1 – 150 Hz

Output voltage max. 100 Vpp (500 ohm)

Output current max. 200 mApp (500 ohm)

Voltage supply 3 x AAA batteries

Treatment time Adjustable from 5 to 100 minutes

Intensity Adjustable from 0 to 50

Operating conditions 5°C – 40°C (41°F – 104°F) at a relative

humidity of 15 – 93%

Storage conditions -25 °C –70 °C (-13 °F – 158 °F) at a

relative humidity of 0– 93%

Dimensions 132 x 63 x 29.5 mm (including belt clip)

Weight

83 g (including belt clip, without batteries),

117 g (including belt clip and batteries)

Use Altitude Limit 3000 m

Use Range Atmospheric

Pressure

700 - 1060 hPa

The serial number is located on the device or in the battery

compartment.

Note: If the device is not used acording to the instructions specified,

perfect functionality cannot be guaranteed!

We reserve the right to make technical changes to improve and

develop the product.

This device complies with European standards EN60601-1 and

EN60601-1-2 (In accordance with IEC 61000-4-2, IEC 61000-4-3,

IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 610004-8 and

IEC 610004-11) and is subject to special precautionary measures with

regard to electromagnetic compatibility. Please note that portable and

mobile HF communication systems may interfere with this unit.

More details can be requested from the stated Customer Services

address or found at the end of the instructions for use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beurer EM 49 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Beurer EM 49

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info