Bedienungsanleitung Beurer FC 65 (Seite 11 von 44) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

620006

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

7.2 Attaching the brush

The device features a soft brush attachment.

1. Fit the soft brush attachment onto the mounting ﬁxture of the device from the front.

2. To remove the brush attachment after use, pull it forwards.

8. Use

1. Moisten the attached brush attachment with water. Never use the device with a dry brush attachment as this can ir-

ritate the skin.

2. Apply the cleansing gel to your facial skin.

3. To switch on the device, press and hold the ON/OFF/speed button for one second. The brush attachment will begin

to vibrate.

4. The device features a slow, medium and fast speed setting. To switch between the individual speed settings, brieﬂy

press the ON/OFF/speed button.

5. Using the function button, select your desired function. The device has a vibration function for gentle facial cleansing

and a pulsation function for thorough facial cleansing.

6. If you have problem skin, you can switch on a blue light during use which combats skin impurities and blemishes. To

add the blue light function, press the light button. If you have activated the pulsation function, the blue light pulsates

and is not permanently lit.

7. Now apply the device gently to your face and cleanse your facial skin using even movements to remove residue, dirt

and dead skin cells.

Note

To ensure comfortable treatment, do not press the brush attachment too ﬁrmly against the skin. Treat each section of skin

for a maximum of 20 seconds.

The brush features a 1-minute timer and stops every 20 seconds for 1 second to indicate that you should switch to cleans-

ing a dierent area. The facial brush switches itself o automatically after 3x 20 seconds. The recommended application

period per use is 1 minute.

8. Switch o the device after use. To switch o the device, press and hold the ON/OFF/speed button for one second.

9. Cleanse your face thoroughly with water to remove any residue from your skin.

10. Pat your skin dry with a towel and then apply a moisturising cream using even, circular movements.

9. Cleaning

IMPORTANT

Before beginning cleaning, always pull the mains adapter out of the socket.

9.1 Cleaning the device and the charger

•

Clean the device using only the methods speciﬁed.

•

Clean the device after use with a soft, slightly damp cloth. If it is very dirty, you can also moisten the cloth with a mild

soapy solution. Do not use any abrasive cleaning products.

•

Clean the charger with a soft, slightly damp cloth from time to time.

•

Esure that no water enters the device or the charger. If this should happen, the device and the charger should only be

used again once they have fully dried out.

9.2 Cleaning the brush attachment

•

To clean the brush attachment, pull it forwards o the device.

•

Clean the brush attachment thoroughly with water after each use.

10. Disposal

Dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment).

If you have any questions, please contact the local authorities responsible for waste disposal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beurer FC 65 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Beurer FC 65

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info