Bedienungsanleitung Beurer FC 96 (Seite 11 von 52) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

695981

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

7. Initial use

7.1 Charging the device

Charge the device for at least 4 hours before initial operation. To do this, proceed as follows:

1. Insert the mains cable into the charger.

2. Insert the mains adapter into the socket.

3. Insert the facial brush into the charger from above. The facial brush display lights up whilst charging is in progress.

The battery symbol

in the display shows the current charge status.

7.2 Attaching the brush

1. The attachment you wish to use should be ﬁxed from above onto the mounting ﬁxture of the device.

2. To remove the brush attachment after use, pull it up and o.

8. Use

1. Moisten the attached brush attachment with water. Never use the device with a dry brush attachment as this can ir-

ritate the skin.

2. Apply the cleansing gel to your facial skin.

3. To switch on the device, press and hold the ON/OFF/speed button for 1 second. The brush attachment will begin to

rotate.

4. The device has four speed settings. To switch between the individual speed settings, brieﬂy press the ON/OFF/speed

button. The selected speed setting is displayed via the corresponding circles in the display that are lit up.

5. Using the rotation button, select your desired rotation level. The device has circular rotation for gentle facial cleansing

and oscillating rotation for thorough facial cleansing.

6. Now apply the device gently to your face and cleanse your facial skin using even movements to remove residue, dirt

and dead skin cells.

Note

To ensure comfortable treatment, do not apply the rotating brush attachment too ﬁrmly to the skin. Treat each section of

skin for a maximum of 20 seconds only.

The brush features a 1-minute timer and stops every 20 seconds for 1 second to indicate that you should switch to clean-

sing a dierent area. The facial brush switches itself o automatically after 3x 20 seconds. The recommended application

period per use is 1 minute.

If the facial brush displays the following symbol in the display, we recommend changing the brush attachment. This

is the only way to continue to ensure optimum cleaning performance. You can obtain a new brush attachment in shops

or from the relevant service address (as speciﬁed in the service address list).

After you have changed the brush attachment, hold down the ON/OFF/speed button and the rotation button at the same

time for at least 2 seconds. The symbol illuminates continuously again.

7. Switch o the device after use. To switch o the device, press and hold the ON/OFF/speed button for 1 second.

8. Cleanse your face thoroughly with water to remove any residue from your skin.

9. Pat your skin dry with a towel and then apply a moisturising cream using even, circular movements.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beurer FC 96 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info