715873
13
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
13
When using a USB mains part, the socket used must always be easily
accessible, so that the USB mains part can be disconnected from the
socket quickly in a hazardous situation. For more information, please
see the instructions for use of the USB part.
Risk of explosion!
Incorrect handling of batteries can lead to fire,
explosions, leakage of hazardous substances or other hazardous situ
-
ations! Do not throw the powerbank into fire, as the integrated battery
could explode.
Do not disassemble, split or crush the rechargeable batteries.
Only use chargers specified in the instructions for use.
Batteries must be charged correctly prior to use. The instructions
from the manufacturer and the specifications in these instructions for
use regarding correct charging must be observed at all times.
Always observe the notes on operation (section 4), cleaning and
maintenance (section 5) and storage (section 6).
If you should have any questions about using our devices, please
contact our Customer Services department.
3. Intended use
IMPORTANT
This heating pad is only designed to warm up the human body.
This heating pad is suitable for personal use only, not for medical or commercial purposes.
4. Operation
4.1 Safety
IMPORTANT
The heating pad is fitted with a SAFETY SWITCH-OFF. The safety system prevents overheat-
ing of the heating pad through automatic switch-off in the event of an error. Once the SAFETY
SWITCH-OFF has taken place, the On/Off button on the heat pad (3) and the white LED display
on the powerbank (1) that is shown when switched on remains illuminated. After cooling, the
heat pad switches on again automatically.
4.2 Charging the powerbank
IMPORTANT
Before you begin charging the powerbank (1), please note the information in section 2 “Important
information”.
The powerbank must be charged fully prior to initial use or if the device has not been used for a long
period. If the powerbank is completely run down, the charging process will take approx. 4,5 hours
until it is fully charged again. To charge the powerbank fully, proceed as follows:
Insert the charging cable (5) provided into the connection socket of the powerbank.
Connect the other end of the charging cable to a USB charger via the USB port (USB charger with 5V / 1A
SELV in accordance with the requirements of IEC/EN 60335, not included). Whilst charging, the LED display
on the powerbank flashes white.
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Beurer HK 67 To Go wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info