Bedienungsanleitung Beurer HL 100 SensEpil (Seite 36 von 44) (Deutsch, Englisch)

620015

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Energy Level

Energy level determines the intensity of the SensEpil™ by beurer light pulse delivered to your skin, from the lowest level

(-) to the highest level (+). Corresponding

INDICATOR LIGHTS on the CONTROL PANEL represent the increases in energy. As

energy level increases, so does hair removal results as well as the risk of possible side effects and complications.

Always start your ﬁ rst SensEpil™ by beurer hair removal session at the lowest energy setting.

If you experience little or no discomfort during and after the hair removal session using the lowest energy level, raise

the energy level by one

INDICATOR LIGHT at the next session, and so on for each subsequent session.

The Skin Color Sensor

Light-based hair removal on darker skin tones can result in adverse effects such as burns, blisters, and skin color changes

(hyper- or hypo-pigmentation).

To prevent such misuse, a unique

SKIN COLOR SENSOR in SensEpil™ by beurer measures the treated skin complexion at the

beginning of each session and occasionally during the session. If the

SKIN COLOR SENSOR detects a skin tone that is too dark

for SensEpil™ by beurer application, the device will automatically stop emitting pulses.

If you see no light pulse and the

SKIN TONE WARNING INDICATOR LIGHT blink for 3 seconds, this is an indication that your skin

tone, measured by the

SKIN COLOR SENSOR, is too dark for safe application. Try using the device on a different body part or

contact the SensEpil™ by beurer support.

Whenever SensEpil™ by beurer is turned on its energy level will automatically be reset to the lowest energy level. Only

one

ENERGY LEVEL INDICATOR LIGHT will be on.

To set the energy level, press the

ENERGY LEVEL SETTING BUTTONS using “-” or “+” to respectively decrease or increase the

energy level. The number of

ENERGY LEVEL INDICATOR LIGHTS will coincide with the change in energy level.

For your safety, when using SensEpil™ by beurer for the very ﬁ rst time, the system is automatically set to deliver the ﬁ rst

50 pulses at the lowest energy level, and the next 200 pulses at up to level 3.

To cancel these safety settings press and hold the “+” and “-”

ENERGY LEVEL SETTING BUTTONS simultaneously until you

hear 2 consecutive “beep” sounds.

To restore these safety settings press and hold the “+” and “-”

ENERGY LEVEL SETTING BUTTONS simultaneously until you

hear 3 consecutive “beep” sounds.

Do not raise the energy level if you experience abnormal discomfort during or after treating with

SensEpil™ by beurer! (See “Possible Side Effects”)

Do not raise the energy level during hair removal session even if you experience no discomfort.

Discomfort may also appear some time after the session.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beurer HL 100 SensEpil Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info