Bedienungsanleitung Beurer LR 330 (Seite 22 von 92) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

619808

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Rinsing the tray

Rinse out the tray every 2 weeks with warm water. If the air is heavily polluted, the device is used intensively

or the water quality is poor, the air puriﬁer must be cleaned at shorter intervals.

Before you can pull the tray out for cleaning, you must ﬁrst pull the water tank out of the air puriﬁer

from above. Remove any deposits in the tray using a soft cloth. When cleaning the tray, do not use any cor-

rosive, caustic or solvent-based cleaning products.

The tray is dishwasher-safe.

IMPORTANT

Regular cleaning is a prerequisite for hygienic and fault-free

operation. Always empty and thoroughly clean the water

tank and the tray of the air puriﬁer if the device contains

water and has not been operated for longer than 3 days. A

lack of cleaning and hygiene can cause bacteria, algae and

fungi to form in the water.

Cleaning the disc set

Before cleaning the disc set, pull it upwards and out of the

device. Clean the disc set every 2 weeks with warm water

and a soft cloth. If it is heavily soiled, you can also clean

the disc set in the dishwasher. When cleaning the disc

set, do not use any corrosive, caustic or solvent-based

cleaning products.

If it is heavily soiled, you can also clean the disc set in

the dishwasher (max. 50°C). Remove the disc set from the tray and place it in the dishwasher. If there is

insucient space in the dishwasher, create extra space by removing the cutlery basket, for example. The

disc set must not be bent or jammed when being placed in the dishwasher. Set the dishwasher to a gentle

cycle (for cleaning glass) and if possible remove the disc set before the drying process. The cycle must not

exceed a temperature of 50°C – otherwise the disc set may deform. Only continue to use the device when

the exterior of the disc set is completely dry.

Descaling the humidiﬁcation discs and the tub

Depending on water hardness and if necessary, the tub and humidiﬁcation discs must be descaled in order

to maintain the performance of the air washer. For this purpose, use a standard descaling agent and obser-

ve the information on the label.

Note:

A light build-up of limescale on the humidiﬁcation discs increases the evaporation output.

Cleaning the housing

Clean the housing of the air puriﬁer with a damp cloth (water or a mild cleaning solution). When cleaning, do

not use any solvents or other aggressive or abrasive cleaning agents, as the surface may become damaged.

Storage

If you do not plan to use the device for a relatively long period of time, we recommend that you thoroughly emp-

ty, clean and dry the device and store it in the original packing in a dry environment, ensuring it is not weighed

down by additional items. Please ensure in particular that there is no water in the water tank or in the tray.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beurer LR 330 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Beurer LR 330

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info