Bedienungsanleitung Beurer MG 240 HD-heat (Seite 13 von 52) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

533584

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Spot massage, i.e. Shiatsu massage without vertical movement, can be selected by pressing one of the

two SPOT buttons (number 6). The position of the localised massage can be changed by pressing and

holding one of the two SPOT buttons until the desired position is reached.

Massage intensity

When using the Shiatsu Massage, two different massage speeds are available, which can be selected us-

ing the SPEED button. If you have the rolling massage activated, first press the SHIATSU button in order

to change to Shiatsu Massage and then set the desired massage speed.

2. Rolling massage

Press the ROLLING button. Select the desired massage region with FULL BACK (button 2), UPPER BACK

(button 3) and LOWER BACK (button 4).

When the massage type (Shiatsu or rolling massage) is changed, the preselected region (full, upper, lower

back) is retained. Note that the massage region must be selected again when switching from localised

Shiatsu massage to rolling massage.

Heating function

Press the HEAT button (button 5) to switch on the heating function of the massage heads. The blue lights

in the massage heads change colour to red.

•

Do not use the massage device for longer than 15 minutes and then allow it to cool. Using the device

for longer can over-stimulate the muscles and cause tension instead of relaxation. The massage can be

finished at any time by pressing the

button. Please note that on switching off, the massage heads first

return to the starting position at the lumbar region. This is indicated by the LED flashing. Once this position

is reached, the device switches off.

•

If the device is stopped be pressing a massage area button twice, it also returns to the starting position

after 15 minutes and then switches off.

•

Do not disconnect the device from the mains supply during operation. Always switch it off first and wait

until it has returned to the initial position.

•

Disconnect the power supply unit plug from the mains after using the device.

Note

•

The device has an automatic shut-off mechanism set to a maximum operating period of 15 minutes.

8. Care and storage

CLEANING

WARNING

•

Before cleaning disconnect the power supply unit from the mains socket and disconnect it from

the device.

•

Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the

device or accessories.

•

Smaller stains can be removed using a cloth or moist sponge together with a little liquid detergent

for delicate fabrics if necessary. Do not use any cleaning agents containing solvents.

•

The removable cover is machine-washable at 40 °C. Please follow the cleaning and care symbols

on the label which is sewn into the cover.

•

Do not use the device again until it is completely dry.

Storage

If you do not use the device for longer periods, we recommend storing it in the original packaging in a dry

place without weighting it down.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beurer MG 240 HD-heat Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Beurer MG 240 HD-heat

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info