Bedienungsanleitung Beurer MG 290 HD-3D (Seite 12 von 56) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

568884

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Hand switch

1 Button

2 timer button (5 – 10 – 15 minutes)

3 demo button

4 neck button

5 neck

button (anti-clockwise rotation)

6 neck

button (clockwise rotation)

7 3D shiatsu button (shiatsu massage)

8 rolling button (rolling massage)

9 spot buttons (localised massage)

10 Height adjustment button (localised massage)

11 full back button (entire back massage)

12 upper back button (upper back massage)

13 lower back button (lower back massage)

14 speed button (massage intensity)

15 heat button (heating)

16 vibration button (in-seat vibration massage)

17 heat button (in-seat heating)

6. Start-up

CAUTION

•

IMPORTANT: Before using the device for the first time, ensure you have released all transport

locks on the massage mechanism. To do this, remove the screws using the tool provided on

the rear of the seat cover. If the transport lock screws are not removed first and the Shiatsu

seat cover is used immediately, the device will become irreparably damaged and unusable.

The warranty will not apply in this instance.

•

Reuse the transport lock screws when transporting the device in the future. Transporting the device

without using the transport locks could cause irreparable damage to the device.

•

Position the seat cover upright on a suitable seat with a sitting area and backrest (chair, sofa or

similar). Make sure that the seat has a sufficiently high backrest.

•

Use the flexible fastening straps and Velcro strips to secure the Shiatsu seat cover.

•

Connect the device to the mains by plugging the plug into the socket.

7. Operation

Gently press your back against the massage device to start with. Then make sure that you are in a comfort-

able position before gradually shifting your weight onto the massage device.The massage must be pleasant

and relaxing at all times. Stop the massage or change your position or the contact pressure if you find it is

painful or unpleasant.

•

Do not force or jam any part of your body, in particular your fingers, between the moving massage elements

or their holders in the device.

•

Sit comfortably and upright on the seat cover. Ensure you sit centered and such that the massage heads

can move to the left and right of your spinal column.

•

Switch on the massager with the button.

The LEDs signal the massage functions which are currently selected.

•

The automatic switch-off function is activated with selection of the massage region and is preset to 15 min-

utes. You can set the automatic switch-off function to 5, 10 or 15 minutes by pressing the timer button.

Please note that changing the timer setting makes the timer start to count again from the beginning. To

avoid overheating the device, select the maximum massage duration at the beginning of the massage and

do not change it again during the massage.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beurer MG 290 HD-3D Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Beurer MG 290 HD-3D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info