Bedienungsanleitung Beurer WL 75 (Seite 15 von 60) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

715700

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

7.6 Radio

Note

You can conﬁgure the radio settings using the “beurer

LightUp” app or the buttons on the wake up light.

Setting the radio station

To set the radio station using the buttons on the wake up

light, proceed as follows:

Press the Set button on the device twice. “SET Radio”

appears on the display. Wait three seconds until the

current station frequency ﬂashes on the display.

2. Use the

/ buttons to set the desired radio station.

To start the station search, press and hold the or

button. Conﬁrm with the Set button.

3. Programme number P 01 ﬂashes on the display. Use

the / buttons to select the desired programme

number (e.g. P 01 or P 02) under which the set ra-

dio station is to be saved. There are 10 radio memory

spaces available. Conﬁrm with the Set button.

Switching the radio on/o

1. To switch the radio on or o, press the Radio button

on the wake up light.

To switch between the saved radio stations, ﬁrst press

the Set button. Use the / buttons to select the de-

sired radio station.

To set the volume, press the / buttons while the

radio is playing.

7.7 Setting the display brightness

Note

The wake up light has four display brightness levels

(

1, 2

and

)

. You can set the display brightness in the

settings of the “beurer LightUp” app or using the but-

tons on the wake up light.

To set the display brightness using the buttons on the

wake up light, proceed as follows:

Press the Set button on the device four times. “SET

Display” appears on the display. Wait three seconds

until a number ﬂashes on the display.

Use the / buttons to set the desired display bright-

ness. Conﬁrm with the Set button. The conﬁgured dis-

play brightness is shown after 5 seconds.

Alternatively, you can also tap on the right-hand side of

the display to make the display brightness brieﬂy brighter.

7.8 AUX connection

You can connect an external audio source (e.g. MP3

player, smartphone or CD player) to the wake up light

via the AUX input.

1. Connect the supplied AUX cable to an audio source.

Insert the other end of the AUX cable into the AUX input

on the rear of the device.

Press the AUX button on the device. The external audio

source is now connected to the wake up light.

4. Use the

/ buttons to adjust the volume.

5. Press the AUX button to exit AUX mode again.

7.9 Switching the button tone on/o

You can only switch the button tone of the wake up light

on and o via the settings in the “beurer LightUp” app.

7.10 Activating/deactivating Bluetooth

Note

The wake up light is supplied to the customer with

Blue-

tooth

activated. If you deactivate Bluetooth

, the wake

up light cannot be connected to the “beurer LightUp”

app.

To deactivate Bluetooth

on the wake up light, proceed

as follows:

Press the Set button on the device ﬁve times. “SET ”

appears on the display. Wait three seconds until “on”

ﬂashes on the display.

Press the or button until “OFF” appears on the dis-

play. Conﬁrm with the Set button. Bluetooth

is now

deactivated on the wake up light.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beurer WL 75 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info