Bedienungsanleitung Beyerdynamic A20 (Seite 7 von 20) (Deutsch, Englisch, Französisch, Spanisch)

704877

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

english

A 20 – Safety

Connection

• The equipment must be connected to a mains socket that has an earth contact.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

•

Lay all connection cables so that they do not present a trip hazard.

•

Whenever working on the inputs and outputs of the equipment switch off power.

•

Check whether the connection figures comply with the existing mains supply. Serious damage could occur due

to connecting the system to the wrong power supply. An incorrect mains voltage could damage the equipment or

cause an electric shock.

• Please note that different operating voltages require the use of different types of power cable and plugs.

Please refer to the following table:

• If the equipment causes a blown fuse or a short circuit, disconnect it from the mains and have it checked and

repaired.

• Do not hold the mains cable with wet hands. There must be no water or dust on the contact pins. In both cases

you could receive an electric shock.

• The mains cable must be firmly connected. If it is loose there is a fire hazard.

• Always pull out the mains cable from the mains and/or from the equipment by the plug – never by the cable. The

cable could be damaged and cause an electric shock or fire.

• Do not use the equipment if the mains plug is damaged.

• If you connect defective or unsuitable accessories, the equipment could be damaged. Only use connection

cables available from or recommended by beyerdynamic. If you use cables you have made up yourself, all claim

to warranty is null and void.

• In order to disconnect the receiver from AC power, switch it off and disconnect the power plug from the power

socket.

Maintenance

• Only clean the equipment with a slightly damp or dry cloth. Never use solvents as these damage the surface.

Troube shooting and servicing

• Do not open the equipment without authorisation. You could receive an electric shock. There are no user-

serviceable parts inside.

• Leave all service work to authorised expert personnel.

3. Disposal

This symbol on the product, in the instructions or on the packaging means that your electrical and

electronic equipment should be disposed at the end of its life separately from your household waste.

There are separate collection systems for recycling in the EU. For more information, please contact the

local authority or your retailer where you purchased the product.

Voltage Power plug according to standard

10 - 125 V

L817 and CSA C 22.2 no 42.

220 - 230 V CEE 7 page VII, SR section 107-2-D1/IEC 83 page C4.

240 V BS 1363 (1984): “Speciﬁcation for 13A fused plugs and switched and un-switched socket

outlets.”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beyerdynamic A20 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info