Bedienungsanleitung BH Fitness G-6446N loopband (Seite 15 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

542140

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ASSEMBLY INSTRUCTIONS

Take the unit out of the box and place it on the

floor as shown in Figure 0.

The assistance of a second person is advisable

for the assembly work. Make sure that all of the

pieces are there:

(B) Main structure; (f) Allen key 6 mm; (g)

Safety key; (i) Bottle of lubricant.

Follow the instructions step by step to

assemble:

1.- First loosen the two top holding knobs (K)

by two turns, anticlockwise, Fig. 1, next take

hold of the handrails (G and H) and lift them in

the direction of the arrow, as shown in Fig. 2,

until you hear the top holding knobs (K) click

into position.

2.- Now loosen off the bottom holding knobs by

two turns (L) Fig. 3.

Holding the handrails (G and H), lift the focus

bars in the direction of the arrow, see Fig. 4,

until you hear the bottom holding knobs (L) click

into position.

NOTE: Make sure that you hear the top holding

knobs click into the handrails and the bottom

knobs click into the focus bars before you let go

of the handrails.

3.- Once you have completed the above,

tighten the top knobs (K) securely, Fig. 5, by

turning them clockwise and the bottom knobs

(L) Fig. 5, by turning it clockwise.

ATTENTION:

Cylinder (Q) Fig (6) is factory set

to high pressure so it must not be knocked. If it

is knocked this may damage it and impair the

operation of the treadmill

FOLDING YOUR UNIT

To fold your unit, stop the machine completely

and unplug it from the wall socket. Lift the base of

the machine, pull pin (S), as shown in Fig. (6)

until it clips into the frame. You can now release

the machine.

UNFOLDING YOUR UNIT

To unfold the machine carry out the procedure

in reverse, i.e. hold the machine with one hand

and use the other hand to pull pin (S) in the

direction of the arrow, Fig. (6) and lower the

machine gently onto the floor. and lower the

machine gently onto the floor. When folding or

unfolding the treadmill make sure that there are

no children about or obstacles that might hinder

the folding motion.

MOVEMENT & STORAGE

The unit is equipped with wheels (P), Fig. (7)

to make it easier to move. Make sure that the

mains cable is unplugged from the wall socket.

If you wish to move the treadmill, the first thing

to do is to fold it up, place your hands on the

handrails (G & H) and tilt the treadmill, Fig (7),

so that the wheels (P) rest on the floor.

To prevent accidents DO NOT move the treadmill

across

uneven floors.

ELEVATION SYSTEM

The machine has 3 levels of inclination.

Carry out the following steps to use the different

positions: Make sure that the unit has stopped

completely. Fold the unit as shown in Fig. (8),

pull the crossbar (M) backwards in the direction of

the arrow and turn it to position it in the slot for the

level that you wish to use.

MAINTENANCE

Use the bottle of lubricant (i) to lubricate the

inside of the belt in order to keep your unit in top

condition and to ensure that friction between the

belt and the board is kept to a minimum (due to

different running styles, always apply more

lubrication to the area where you place your feet

during the exercise) It is advisable to lubricate

the base of the belt every 3-12 months,

depending on how often it is used.

If the belt starts to slip after lubrication, then

check the tension of the belt. To tension the

belt, take the 6 mm Allen key (f) and with the

machine set to 4 km/h turn screws (R & L) one

turn in a clockwise direction.

Operating

speed

Recommended lubrication

period

1~6 km 1 year

6~12 km 6 months

12~16 km 3 months

ADJUSTING THE BELT

If your unit is not seated evenly on the four

contact points, this may cause the belt (X) to

shift sideways. Rigorous quality control adjusts

and checks the running belt. However, due to

weight differences and individual styles of

running, the belt may be prone to shift

sideways.

If the belt does shift to the left or right, stop the

machine.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BH Fitness G-6446N loopband Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info