Bedienungsanleitung BH Fitness G910 (Seite 10 von 39) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

542137

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

LINE

G910 / G910TV

sportkoncept

ASSEMBLY INSTRUCTIONS.-

Take the unit out of its box and make sure that all

of the pieces are there, Fig.1:

(69) Main post with handlebar and monitor; (1)

Main body; (44) Front trim cover; (110-111) Bottom

trim covers, left and right (L & R) for the knuckle

joints on the focus bars; (36) Top trim cover; (38)

Side trim cover; (101) Knuckle joint spacers; (133)

Screw M-4x15; (112) Screw M-4x50; (102) Screw

M-10x70; (103) Self-locking nut M-10; (37) Self-

tapping screw M-4x15; (5) Screw M-6x10; (8) Allen

screw M-10x20; (14) Grower spring washer M-10;

(13) Flat washer M-10 Ø 18; (K) Combination

spanners; (L) Star driver spanner; (LL) Allen key;

(143) The adapter. G910 15v. 1Amp; (155) B

ottle

holder.

Mod. G910Tv.-(C01B) Adaptor 15v 2 Amp; (C03)

Mains cable; (C02) MP3 cable.

FITTING THE MAIN POST.-

Mod.G910.-

Take hold of the post (69) and bring it up to the

boss on the main body (1), connect the terminals

(O), sticking out of the bottom of the post, with

terminal (P) coming up out of the top of the tube on

the main body (1), Fig.2, now slip the main post

over the boss on the main body in the direction of

the arrow, making sure not to snag any of the

cables.

Take screws (8), Grower spring washers washers

(14) and flat washers (13) and screw together as

shown in Fig.2A. without tightening fully.

Mod.G910 Tv.

Take hold of the post (69) and bring it up to the

boss on the main body (1), connect the terminals

(O), sticking out of the bottom of the post, with

terminal (P) coming up out of the top of the tube on

the main body (1), Fig.2.

Connect terminal (s) coming out of the bottom of

the focus bar to terminal (r) coming out of the tube

on the main body (1) Fig. 2A, and insert the focus

bar onto the boss on the main body in the direction

of the arrow, making sure not to catch any of the

cables.

Fit screws (8) along with their flat washers (14) and

Grower washers (13) Fig.2A.

Line the main post up with the main body and

tighten the screws securely.

ATTACHING THE FOCUS BARS TO

THE FOOT BARS.-

Take the bottom section of the focus bar (98R) and

insert the spacer (101) into the knuckle joint at the

bottom end of the bar in the direction of the arrows

Fig.3A.

Having done this bring the focus bar to the foot bar

(154) and insert screw (102) along with washer

(13). Next, fit the washer (14) and screw on the

self-locking nut (103) securely.

Do the same for the left focus bar (98L) with the

foot bar (153).

When everything has been assembled, check that

the monitor works by doing some exercises. If it

works correctly then fully tighten the screws (8) on

the focus bars, Fig.2A. that were left hand tight in

step 2 of the assembly instructions.

FITTING THE TRIM CAPS TO THE

KNUCKLE JOINTS.-

Take the two trim caps (110-111), marked on the

inside with the letter (R) and fit them onto focus bar

(98R), as shown in Fig.4A. Next use screw (133) to

screw the caps onto the focus bars and use screws

(112) to screw the caps together.

Do the same with the trim caps (L) for focus bar

(98L).

FITTING THE TOP & SIDE TRIM

COVER.-

Take the top trim cover (36) and place it onto the

lower triangle on the main body (1), as shown in

Fig.5. Use screw (37) to secure the bottom of the

cover, as shown in Fig.5A.

Next, position the side cover (38) so that it faces

the bottom triangle on the main body and secure

the cover using screws (5).

Next, remove the screws from the main post (69),

Fig.5B, position the bottle holder and secure it by

using the screws removed previously.

FITTING THE FRONT TRIM COVER.-

Fit the trim cover by sliding it onto the side tubes,

see Fig.5 . Next, take screw (112) and secure the

cover by tightening the screw.

LEVELLING.-

Once the unit has been placed into its final position

for doing exercise, make sure that it sits flat on the

floor and that it is level. This can be achieved by

screwing the adjustable support blocks (120) up or

down, as shown in Fig.6.

MOVEMENT & STORAGE.-

The appliance is equipped with wheels (125)

making it easier to move about. The two wheels at

the front of the appliance make it easy to store the

machine away, as shown in Fig 7.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BH Fitness G910 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info