Bedienungsanleitung BH Fitness BG6448N V3 (Seite 16 von 55) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

528782

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

ASSEMBLY INSTRUCTIONS

Take the unit out of the box and place it on the

floor as shown in Figure 0.

The assistance of a second person is advisable

for the assembly work. Make sure that all of the

pieces are there:

(B) Main structure; (E) Side bar base cover

(Left); (F) Side bar base cover (Right); (a) Allen

screw M5x10; (f) Allen key 6 mm; (g) Safety

key; (i) Bottle of lubricant.

Follow the instructions step by step to

assemble:

1.- First loosen the two top holding knobs (K)

by two turns, anticlockwise, Fig. 1, next take

hold of the handrails (G and H) and lift them in

the direction of the arrow, as shown in Fig. 2,

until you hear the top holding knobs (K) click

into position.

2.- Now loosen off the bottom holding knobs by

two turns (L) Fig. 3.

Holding the handrails (G and H), lift the focus

bars in the direction of the arrow, see Fig. 4,

until you hear the bottom holding knobs (L) click

into position.

NOTE: Make sure that you hear the top holding

knobs click into the handrails and the bottom

knobs click into the focus bars before you let go

of the handrails.

3.- Once you have completed the above,

tighten the top knobs (K) securely, Fig. 5, by

turning them clockwise and the bottom knobs

(L) Fig. 5, by turning it clockwise.

4.- Position the left and right base covers (E)

and (F) in the direction of the arrow facing the

corresponding side bar, as shown in Fig. (6) and

attach them by using screws (a), as shown in

Fig. (6).

ATTENTION:

Cylinder (Q) Fig (7) is factory set

to high pressure so it must not be knocked. If it

is knocked this may damage it and impair the

operation of the treadmill

FOLDING YOUR UNIT

This treadmill is equipped with a safety

release mechanism for folding purposes.

To fold and store the unit follow the instructions

below:

Before attempting to fold the unit, stop the belt,

lower the elevation setting to minimum and

unplug the cable from the mains socket.

To fold the unit follow the instructions below:

First, using one hand, pull the red knob marked

number (1) in the direction of the arrow, Fig. 7A.

Then, without releasing the red knob, use the

other hand to lift the machine, marked number

(2), in the direction of the arrow as shown in Fig.

7A.

Lift and fold the machine up until you hear it lock

into position (O), located at the bottom of the

machine, Fig. 7

Store your unit in a dry place, preferably not

subject to changes in temperature.

UNFOLDING YOUR UNIT

If you wish to use the treadmill, do the reverse

procedure. Use your foot to press lever (O) in

the direction of the arrow as shown in Fig (7)

and slowly lower the treadmill belt down to the fl

oor. When folding or unfolding the treadmill

make sure that there are no children about or

obstacles that might hinder the folding motion.

MOVEMENT & STORAGE

The unit is equipped with wheels (P), Fig. (8)

to make it easier to move. Make sure that the

mains cable is unplugged from the wall socket.

If you wish to move the treadmill, the first thing

to do is to fold it up, place your hands on the

handrails (G & H) and tilt the treadmill, Fig (8),

so that the wheels (P) rest on the floor.

To prevent accidents DO NOT move the treadmill

across

uneven floors.

MAINTENANCE

Use the bottle of lubricant (i) to lubricate the

inside of the belt in order to keep your unit in top

condition and to ensure that friction between the

belt and the board is kept to a minimum (due to

different running styles, always apply more

lubrication to the area where you place your feet

during the exercise) It is advisable to lubricate

the base of the belt every 3-12 months,

depending on how often it is used.

If the belt starts to slip after lubrication, then

check the tension of the belt. To tension the

belt, take the 6 mm Allen key (f) and with the

machine set to 4 km/h turn screws (R & L) one

turn in a clockwise direction.

Operating

speed

Recommended lubrication

period

1~6 km 1 year

6~12 km 6 months

12~16 km 3 months

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BH Fitness BG6448N V3 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info