Bedienungsanleitung BH Fitness G2356 (Seite 17 von 53) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

783633

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

Slip the main post (21) over the boss

(101) on the main body in the direction

of the arrow, Fig.6, making sure not to

snag any of the cables.

Fit the screws (9), along with the

washers (13) and (10), removed

previously, Fig.6, and tighten securely.

Lower the bottom trim section (22) for

the main post (21) down over the boss

section of the main body (101), Fig.6.

Fit the bottom cover (54).

5. FITTING THE FOCUS

BARS.-

Insert the focus bar spindle (108)

through the spacer bushes on the

main post (21), Fig.7, leaving it

centred.

Fit the spacer washers (17) as shown

in Fig.7. Insert the left focus bar (15L)

(marked with the letter “L”) onto the

focus bar spindle (108), Fig.7, then fit

the right focus bar (15R) (marked with

the letter “R”) on the other end of the

spindle. Fit the bolts (14) and the flat

washers (12-13) and with the help of

the box spanners tighten securely.

6. FITTING THE FEET.-

Take the right pedal (45), Fig.8,

(marked with the setter “R”) and slide

it onto the crank shaft (73) on the

right- hand side of the machine.

Now take washer (13) (52) and bolt

(14) and tighten securely.

Take the left pedal (45), Fig.8,

(marked with the setter “L”) and slide it

onto the shaft (73) on the left-hand

side of the machine.

Now take washer (13) (52) and bolt

(14) and tighten securely.

Attach the bottom covers (51), Fig.8,

and fit screws (85).

7. FITTING THE FOOT BARS.-

Take the right foot bar (45) and

position it on the “U” at the bottom of

the right focus bar (15R), Fig.9.

Insert screw (46), as shown in Fig.9,

then fit the flat washer (44) and the

self locking nut (43), and tighten

securely.

Take the left foot bar (15L) and go

through the same assembly procedure

as with the right.

8. FITTING THE FOCUS BAR

SIDE COVERS TO THE FOOT

BARS.-

Next fit the footrest covers (42R) and

(42L) with the bottom of the joints on

the right side, Fig.10. Use screws (41)

to screw them together. Then do the

same with the other covers on the left-

hand side.

9. FITTING THE UPPER

FOCUS BARS.-

Take hold of the Hand-grip connectors

(2), sticking out of the top bars (7L)

and (7R).

Take the top left bar (7L) (marked with

the letter “L”).

Insert the top bar onto the bottom left

focus bar (15L), lining up the letters

(L), Fig.11, fit the screws (9), the

washers (10) (13) and tighten

securely. Now go through the same

procedure for the top right focus bar

(7R).

10. FITTING THE FOOTRESTS.-

Next, remove the screws (48), the flat

washers (89) (91) and the knobs (90)

and position the right footrest (47R)

(marked with the letter “R”) on top of

the unit’s right foot (45), Fig.12, (left

and right refers to the user’s position

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BH Fitness G2356 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info