EN
5
Requirements of the Installation Location
Electrical Connection
Forthesafeandfaultlessoperationofyourvitaletheinstallationlocationmustfullthefollowingconditions:
• The device must be placed on a level, at, solid and non-slip surface that can hold the juicer,
• Make sure it is used in a location where the juicer will not tip.
• Do not place a cloth under the device.
• Choose the installation location so that children cannot play or have access, nor can access the power cord.
• Set-up the unit in an indoor environment.
For a safe and faultless operation of the device, the following points for the electrical connection must be observed.
• Before connecting, compare the technical data of the device, voltage and frequency 220 - 240 Volts AC ~ 50 - 60 Hz,
with your power supply. The data must match, so the device will not be damaged. Please consult an electrician in case of
uncertainty.
• The electrical safety can only be ensured, if the unit is connected to a properly installed protective electrical system.
• The manufacturer assumes no responsibility for damage caused by improper protective electrical system.
• Make sure that the power cable is undamaged and does not pass over hot surfaces or sharp edges.
• The power cable must not be pulled tight or under tension.
• Make sure that the power plug is properly inserted into the power socket. A loose power plug can lead to overheating
or an electrical shock.
