For foodstuffs of a weight that exceeds the maximum weight please use the JET DEFROST program. If the maximum weight
is exceeded, the oven will not perform correctly.
Cooking program
This appliance allows you to program several functions.
Let us assume that you wish to set the following cooking program:
(1) JET DEFROST;
(2) First stage: Cook for 5 minutes at 100% power.
(3) Second stage: Cook for 10 minutes at 50% power.
Steps: 1. Press CANCEL.
2. Enter the JET DEFROST program.
3. Enter the time ( 5 minutes ) and power setting (100%).
4. Press MEMORY.
5. Enter the time ( 10 minutes ) and power setting (50%) for the cooking program.
6. Press START.
Note: JET DEFROST and WEIGHT DEFROST can only be selected before the cooking stage.
The programs cannot be changed between or after stages 1 or 2.
Setting the “SAFETY LOCK” (button lock)
The button lock prevents children from operating the oven unsupervised. To activate the button lock, press and hold down the
numerical buttons 5 and 7 for three seconds. The oven sounds an acoustic signal and LOCK appears on the display.
To release the safety locking feature, press and hold down the numerical buttons 5 and 7 for three seconds.
An acoustic signal sounds when the door is unlocked.
How to stop the microwave during operation
• Open the door.
• You can continue the cooking process by closing the door and pressing START.
Note:
The oven starts operating as soon as the door is closed.
Cleaning and maintenance
1. Before you clean the microwave, switch it off and pull the plug out of the mains socket.
2. Keep the interior of the microwave clean. If food is splattered or spilled on the walls of the oven, it should be wiped away using
a moist cloth. You can use a mild detergent if the microwave has become very dirty. Do not use cleaning sprays or other powerful
cleaning agents as they can result in the surfaces becoming stained, dull or streaky.
3. The exterior surfaces can be cleaned with a moist cloth. To avoid damage to the internal components you should make sure that
no water can enter through the ventilation holes.
4. Wipe the glass door on both sides with a moist cloth to remove any splatter.
5. Do not allow the controls to become wet. Clean the controls with a soft moist cloth. When you clean the controls, leave the door
open to prevent the microwave from being inadvertently switched on.
6. If any condensation forms on the inside or outside of the microwave oven door, wipe it off with a soft cloth. This condensation
can form if the microwave is operated in humid conditions.
7. From time to time it may be necessary to remove the glass turntable in order to clean it. Wash the glass turntable in warm water
with a little detergent or in a dish washer.
8. The roller support ring and the microwave oven floor should be cleaned regularly. Just wipe the surface using a mild cleaning
agent. The roller support ring can be washed in warm water with a little detergent or in a dish washer. Make sure that you replace
the roller support ring in the correct position.
9. To remove odours, place a microwave-safe bowl of water containing the juice and some peel from a lemon inside the microwave.
Heat this for 5 minutes in the microwave. Thoroughly wash the microwave and dry it with a soft cloth.
10. If it should be necessary to replace the lamp inside the oven, this should be carried out by a dealer.
19
