496732
36
Zoom out
Zoom in
Vorherige Seite
1/45
Nächste Seite
32
9.5.6 Set the Maximum Recording Time for Messages
You can set a maximum length for the recording time of each incoming
messages, as 60 seconds, 120 seconds,180 seconds, or unlimited up to
the available memory of the answering machine.
1. Press [ Menu ] and <UP/DOWN> to scroll to Answer Machine.
2. Press [ Select ] and <UP/DOWN> to scroll toTAM Settings.
3. Press [ Select ] and <UP/DOWN> to scroll to Recording Time.
4. Press [ Select ] and <UP/DOWN> to select 60 Sec, 120 Sec, 180
Sec, or Unlimited.
5. Press [ Select ] to confirm your choice.
9.5.7 Remote Access
You can check your messages, or otherwise operate your answering
machine, by calling the phone when you are away from home and entering
a 4-digit remote access PIN using a tone-dialling phone. The 4-digit remote
access PIN code is used to prevent other people from unauthorised access
of your answering machine.
Note: Remote Access must be activated if you want to be able to use this
feature, see section 9.5.7.2.
9.5.7.1 Change the 4-Digit Remote Access PIN
1. Press [ Menu ] and <UP/DOWN> to scroll to Answer Machine.
2. Press [Select ] and <UP/DOWN> to scroll to TAM Settings.
3. Press [Select ] and <UP/DOWN> to scroll to Chg Remote PIN.
4. Press [ Select ] and enter the Old remote access PIN (Default
Value:0000).
Note: If you enter an incorrect PIN, “Old PIN Invalid” is displayed and it
returns to Chg Remote PIN menu.
5. Press [ OK ] and enter the new remote access PIN.
6. Press [ OK ] and enter the new remote access PIN again.
7. Press [ OK ] to confirm.
Note: If the new PIN entered in Step 6 is not the same as the new remote
access PIN entered in Step 5, “New PIN Invalid” is displayed, and you
must enter the PIN again from step 5.
9.5.7.2 Activate or Deactivate the Remote Access
The remote access must be enabled otherwise the access will not be
permitted.
1. Press [ Menu ] and <UP/DOWN> to scroll to Answer Machine.
2. Press [ Select ] and <UP/DOWN> to scroll to TAM Settings.
3. Press [Select ] and <UP/DOWN> to scroll to Remote Access.
4. Press [Select ] and <UP/DOWN> to scroll to On or Off.
5. Press [Select ] to confirm your choice.
36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Binatone iDECT L1i wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info