Bedienungsanleitung Binatone Lyris 110 (Seite 1 von 2) (Englisch)

496744

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

9. P(Pause) button

Lyris 110

Unpacking your phone

Corded Telephone

1. Where to find it

2. Installation

1. Locating the Base unit

The Base unit should be placed on a level surface, in a position where:

 the telephone line cable will reach your telephone line socket or

extension socket.

 it is not close to a sink, bath or shower, or anywhere else where

 it is not close to other electrical equipment - fridges, washing

machines, microwave ovens, TVs, fluorescent lights, etc.

2. Plug the coiled handset

cord into the Handset.

Plug the other end into

the jack on the left

side of the Base unit.

3. Place the Handset in

the Base unit.

4. Plug the telephone line cord free end

into a modular wall jack.

Press the cable into the groove so that

the Base unit stands level.

Lift the Handset and check for Dial tone

in the earpiece.

Always use the

telephone line

cord supplied

with your

Lyris 110 phone.

Other telephone

line cords may

not work.

Make sure the plugs

click into place.

to Modular

Wall jack

2. Installation

it might get wet.

Making a

Lift the Handset, listen for a dial tone.

2 Dial the telephone number you wish to call.

To end the call, return the Handset to the

call

Lift the handset to answer call.

To answer a

call

Replace the Handset on the Base unit cradle.

To end a call

3. Telephone Operation

Base unit.

Last Number

Lift the Handset to redial the last number.

Press LNR button.

Redial

Ö The phone automatically dials the last

number you called (maximum of 32 digits).

Mute

During a call press and hold the

(MUTE)

button.

Function

When the mouthpiece is muted, the person

at the other end of the call cannot hear you

but you can hear his side.

To get back to the call, to release the

button.

Use on PBX

Press R (RECALL) button on your

If you are using your Lyris 110 phone on a

RECALL

;

(MUTE)

Lyris 110 phone.

PBX,and the PBX user guide tells you to press

Inserting a

Pressing PAUSE button immediately after the

Pause in

For some switchboard system, an access

the dialing

sequence

access number, a pause of about 3.6 seconds

will be entered, and the desired number can

Press PAUSE button to insert a pause when

dialing or storing Long Distance Access Codes.

Telphone Operation continue...

be dialed immediately.

number must be dialed (usually an 8 or 9) to

get another dial tone and an outside line.

In the box you will find:

• Base Unit

• Handset

• Coiled Handset cord

• Telephone line cord

for Base unit

• User manual

Keep the packing

materials in a safe

place in case you later

need to transport

Keep your sales (till)

receipt, which is your

guarantee.

the unit.

3. STO (Store)button

4. MEM button

is ringing

for an incoming call.

Ringer light

- This flashes when the phone

2. M1,M2 and M3 one -Touch Memory Buttons

5. LNR(Last Number Redial) button

6. Mute button

7. R(Recall) button

8. P(Pause) button

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Binatone Lyris 110 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info