8
3 INSTALLATION AND SETUP
You can use The Brick as a mobile phone or as a
Bluetooth handset connected to another mobile
phone.
When you want to use The Brick as mobile phone,
a SIM card must be installed. Keep the SIM card
out of reach of small children.
The SIM card and its contacts can be damaged
easily by scratches or bending, so handle the card
carefully.
3.1 Insert the SIM card, Micro SD Card
and Battery
• Switch off the phone, disconnect the power
adaptor.
• To remove the back cover, slide the back cover
down, and then lift the cover off.
• Open the SIM holder by pushing the metal part
to the right and lifting it up.
• Carefully slide the SIM card into the holder with
the gold connectors face down. Close the SIM
card holder by pressing down the metal part
and slide it to the left until you hear a click.
• Replace the battery by aligning the gold
connectors on the battery with those on the
phone and push the top of the battery down
until it clicks into place.
• If you want to install a micro SD memory card
open the SD card holder by sliding the sliding
the metal part to the left. Put the micro SD card
and close the card holder.
• Replace the back cover by placing it at on the
back of the handset and pushing up until it
clicks into place.
