Bedienungsanleitung Bionaire BFH261 (Seite 2 von 14) (Deutsch, Englisch, Holländisch, Französisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

711659

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

READ AND RETAIN THE FOLLOWING

FOR FUTURE REFERENCE.

GENERAL DESCRIPTION (FIG.1 & 4)

A. POWER LIGHT

B. SET TEMPERATURE LIGHTS

C. LOW POWER

D. HIGH POWER

E. MODE/OFF CONTROL

F. SWIVEL BASE

IMPORTANT SAFEGUARDS

Mains connection

• Read these instructions carefully, in conjunction

with the illustrations, before using the heater.

• Before connecting the heater, check that the

voltage indicated on the rating plate corresponds

to the mains voltage in your home / office.

• Avoid the use of an extension cord because it

may cause the heater to overheat.

• WARNING: Risk of Fire. Discontinue use if

the outlet or plug become hot to the touch.

Overheating may indicate a worn or damaged

outlet. Consult a qualified electrician for outlet

replacement.

Safe positioning

• Only touch the heater with dry hands.

• DO NOT position where it can be touched by

children, especially the very young.

• When using the heater, DO NOT place in the

immediate surroundings of a shower or

swimming pool.

• DO NOT use this heater outdoors.

• DO NOT position the heater directly under a

power socket.

• Position the heater in such a manner that the

air flow toward the heater and away from it, is

not obstructed.

• The heater must NOT be covered. ( )

• Allow a safe area around the heater. DO NOT

block the air inlet or outlet. Keep objects at

least 50 cm from the top and sides and 200

cm at the front.

• Do not use this heater when it is lying on its side.

• If the heater is tipped over, unplug it and

allow it to cool before standing it back up.

• DO NOT use the heater in rooms with

explosive gas (e.g. petrol) or while using

inflammable glue or solvent (e.g. when gluing

or varnishing parquet floors, PVC etc.).

• CAUTION: In order to avoid a hazard due

to inadvertent resetting of the thermal

cutout, this appliance must not be supplied

through an external switching device, such

as a timer, or connected to a circuit that is

regularly switched on and off by the utility.

• This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or lack

of experience and knowledge, unless they

have been given supervision or instruction

concerning use of the appliance by a person

responsible for their safety. Children should be

supervised to ensure that they do not play with

the appliance.

BATHROOM USE

• If this heater is going to be used in a

bathroom, or similar room, it must be

installed:

a. In such a way that the switches and other

controls cannot be touched by the person

in the bath or shower.

b. Outside the grey shaded areas (Fig.2 & 3).

• If you are unsure about the installation of this

heater in the bathroom we recommend that

you seek advice from a professional

electrician/installer.

Safety in use

• Extra caution is necessary when the heater is

used near children or when it is left unattended.

• DO NOT insert any objects into the heater.

• Keep the mains cord at a safe distance from

the main body of the heater.

• Prevent overheating of the heater by keeping

the air inlet and outlet unblocked. DO NOT

hang anything in front of or above the heater.

• If overheating should occur, the built-in

overheating safety device will switch off the

heater.

• DO NOT use aerosols, inflammable substances

or materials sensitive to heat in the flow of hot air.

• Do not place the cord under a rug.

Servicing

• Should the heater stop working, first check the

fuse in the plug (UK only) or fuse/circuit breaker

at the distribution board is operating, before

contacting the manufacturer or service agent.

• If the supply cord or plug is damaged, it must

be replaced by the manufacturer or its service

agent or a similarly qualified person in order to

avoid hazard.

• The heater contains no user serviceable

parts and should the product suffer damage or

breakdown it must be returned to the

manufacturer or their service agent.

OPERATING INSTRUCTIONS

Your heater is equipped with a technologically

advanced electronic thermostat.You can set the

ENGLISH

Fig.2 Fig.3

ADDITIONAL FEATURES:

1.Press & hold at any time to turn the heater off. Heater will save the

last setting in memory.

2.Press to turn heater on and heater will recall the last setting in memory.

3.Select the desired thermostat setting. The heater will cycle ON and OFF

as it maintains the preset temperature.

PRESS TEMPERATURE

1 II HIGH (2 kW)

I LOW (1 kW)

3 - 7

HIGH (2 kW)

C, 18

C, 20

C, 24

8 - 12 I

LOW (1 kW)

C, 18

C, 20

C, 24

O/Off O/Off

Fig.4

Fig.1

BFH261

NOTE: Not suitable for bathroom use in the UK.

BFH261I07MLM1.qxd 9/6/07 17:37 Page 4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bionaire BFH261 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info