Setting the OFF timer
1. Select the Mode and temperature you want
the heater to run in (e.g. Lo-Auto-18˚) as above.
2. While the heater is running hold down both
the (+) and (-) buttons together to select timer.
The display will flah and red dot will flash on
the right hand sode of the digital display.
3. Using either the (+) or (-) buttons programme
the heater to turn off up to 16 hours later in
increments of 1 hour.
Example - 9 hours.
4. After setting the time, the digital display will
return to showing the current room
temperature and will illuminate to show the
timer is activated. After the predetermined
length of time has passed, the heater will
automatically switch off.
NOTE:
1. When the timer is set, a red dot will flash
continuously in the right hand side of the
digital display.
2. If the Mode button is pressed when the timer
is actived, the timer function will be
cancelled. To reactivate the timer, it will need
to be reprogrammed as detailed above.
3. It is not possible to set the on and off timers
as part of the same programme.
USING THE TIMER (FOR BFH400 ONLY)
Your heater has been equipped with a timer.
When the timer is used, the heater will switch
itself off after a preset time (max. 180 minutes).
Turn the timer control clockwise and set the
number of minutes e.g. 20 = On for 20 minutes.
The pilot light goes on and the appliance switches
on at the preset temperature and setting. The
heater switches off and the pilot light goes out
as soon as the preset time has elapsed. e.g. if
you turn the dial clockwise to 20, the heater will
stay on for 20 minutes and then switch off.
To switch the timer off:
Slowly turn the timer control anti-clockwise and
select setting.
MOUNTING THE HEATER ON THE
WALL - (Fig. 3 - 4)
1. Use the bracket as a template to mark the
position of the holes to be drilled.
(NOTE: Ensure that the position you choose
is suitable for mounting the heater and that
the area for fixing is away from hidden
electrical cables or pipes.)
2. Drill the holes and fix the bracket to the wall
using wall plugs and screws.
3. Slide the heater correctly onto the bracket
until it "clicks" firmly into place and the heater
is safely held.
FROST GUARD
For BFH400 only
Turn the thermostat to the minimum (furthest
left position). The unit will automatically start
when the temperature drops below 5˚C.
For BFH410 only
Press the 'Mode' button 5 consecutive times
for Anti Frost setting (AF will show in the
digital display). This special setting is
automatically activated when the (AF) mode is
selected. In this mode, the heater is off until
the room's temperature reaches freezing and
the heater automatically turns on HI power.
The heater will cycle ON and OFF as it
maintains the temperature between 5˚C - 8˚C.
AUTO SAFETY SHUT OFF
This heater is equipped with a patented,
technologically advanced safety system that
requires the user to reset the heater if there is a
potential overheat situation. When a potential
overheat situation is reached, (e.g. if the heater
was accidentally covered) the system will
automatically switch the heater off. Operation
can only be resumed if the user resets the
heater as detailed below.
To reset the heater
1. Unplug the heater and allow 30 minutes for
the heater to cool down.
2. After 30 minutes plug the heater in and
operate normally.
CLEANING
•Turn the switch to the 0 (OFF) position.
• Remove the plug from the wall socket.
•Wait for the heater to cool down sufficiently.
•You may clean the outside of the heater with a
damp cloth. Do NOT allow water to come into
the appliance. Do NOT use soap or chemicals,
which may damage the housing. Allow sufficient
time to dry before plugging the unit back in the
socket.
• Clean the air inlet and outlet openings
regularly (with normal use at least twice a
year) with a vacuum cleaner.
STORAGE
If you do not plan to use your heater for an
extended period of time (i.e. during the summer
months), we recommend you to re-pack the unit
in its original packaging or any other dust-free
packaging and store it in a dry and cool place.
• The heater contains no user serviceable
parts and should the product suffer damage
or breakdown it must be returned to the
manufacturer or their service agent.
HOW TO REMOVE THE HEATER FROM
THE BRACKET
1. Always unplug the heater first.
2. Push the small lug on the bracket
downwards and simultaneously pull the
appliance off the bracket.
OPERATION (FOR BFH400 ONLY)
Setting the power level
Turn the Mode control switch clockwise
• = low power (1200 watts)
•• = high power (2400 watts)
* = fan position - cool air
Setting the temperature level
Use the thermostat to set the desired
temperature level. The thermostat will maintain
the desired temperature level by switching on
and off at intervals.
1. To find the ideal thermostat setting, turn the
thermostat knob clockwise as far as it will go.
2. When the desired temperature is reached,
slowly turn the thermostat knob anti-clockwise
until the heater turns off.
3. The heater will now automatically retain the
temperature at the required level.
MANUAL/ACCUTEMP DIGITAL
TEMPERATURE CONTROL (FOR
BFH410 ONLY)
This heater is equipped with an AccuTemp™
digital thermostat that allows you to set the
precise temperature that you require.
Altematively, use the Manual option to set the
heater to run continuously.
1. Press the 'MODE" button once for manual
LOW power. "Lo" (1200W) will show in the
digital display.
2. Press the " MODE" button again for manual
HIGH power. "Hi" (2400W) will show in the
digital display.
3. Press the "MODE" button again for
AUTO/HIGH power. The preset thermostat
temperature will flash for 2 seconds in the
digital display.
4. Press the "MODE" button again for
AUTO/LOW power. The preset thermostat
temperature will flash for 2 seconds in the
digital display.
5. To raise or decrease the preset themostat
setting (13ºC-30ºC). scroll up or down using
the (+) or (-) buttons. The digital display will
flash the selected preset temperature for 2
seconds. If the room temperature is below
your selected thermostat temperature the
heater will switch on and the room
temperature will gradually increase until the
preset temperature is reached. AccuTemp™
will now automatically maintain the heater
temperature at the desired level.
6. To shut the unit off at any time, press the
"MODE" button for 2 seconds.
NOTE:
1. If the heater will not switch on in AccuTemp™
mode, please check the room temperature is
not higher than the preset thermostat
temperature.
2. It is normal for the heater to cycle On and Off
as it maintains the selected room temperature. In
Auto mode, when the heater automatically
switches off, the High or Low indicator (depending
on the setting) will flash. To run the heater
continuously select manual High or Low.
3. AccuTemp™ will memorise the settings if the
heater is turned off using the "MODE" button
(see 6 above). however, if the heater is
unplugged, the AccuTemp settings will need
to be reprogrammed as detailed from1 above.
USING THE TIMER
AccuTemp
TM
Programmable Timer (For
BFH410 only)
Accutemp™ allows the user to programme the
heater to come ON at a preset time OR switch
OFF after a selected period.
Setting the ON timer
1. If the heater is on, press the mode button for
2 seconds to switch the heater off.
2. While the heater is off, hold down both the (+)
and (-) buttons together to select timer. The
display will flash and a red dot will flash on
the right hand side of the digital display.
3. Using either the (+) or (-) buttons, programme
the heater to switch on up to 16 hours later, in
increments of 1 hour.
Example - 4 hours.
4. After the preset length of time the heater will
automatically turn on to “Auto-Hi-24˚C” for a
period of 2 hours.
3
Example - Switch ON
The time is 1 pm. You require the heater to
switch on at 5 pm therefore: Set the ON time
at 4 hours.
Example - Switch OFF
The time is 1 pm. The heater is running and
you require the heater to switch off at 10 pm
therefore: Set the time at 9 hours.
4
