Bedienungsanleitung Bionaire BWM5251 (Seite 3 von 42) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

476103

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

If the Reset Light ( ) is still on at this point, and

the unit does not being to produce moisture

within a few minutes, then please repeat steps

1-5.

IMPORTANT:

If you do not plan to use the humidifier for two or

more days, make sure any residual water is

drained from the water tank and base to prevent

algae or bacteria growth.

Cleaning and Maintenance Instruction

The following maintenance procedures must be

routinely followed in order to ensure proper,

efficient operation of your humidifier. The unit

WILL FAIL if it is not cleaned properly.

Regular cleaning prevents scale build-up on the

heating element and tray. It also prevents

microorganisms from growing on the tray and

tank. This ensures that maximum efficiency will

be achieved.

We cannot over-emphasize how essential

proper cleaning is to the maintenance and

continued use of your unit and the avoidance of

algae or bacteria build-up.

Regular Maintenance

The frequency of maintenance will depend on

the average daily use of your humidifier and the

water hardness of your area. It is recommended

that this procedure is carried out weekly or more

regularly if necessary.

1. Before cleaning, set the control to Off

(

) position and unplug the unit from the

electrical outlet.

2. Remove the water tank (A) then unlock the

misting chamber (B) by rotating the safety

lock. Lift mist chamber from the unit’s base.

3. Empty water and minerals from the base and

wash it through to remove any sediment and

dirt that has accumulated in the base.

NOTE: It is imperative that the base is cleaned

properly. The base is dishwasher safe for easy

cleaning (Top rack of the dishwasher only).

4. Rinse out the tank out and reﬁ ll with clean

cool water.

5. Wipe the heating element clean with a soft

cloth after it has had a chance to cool.

WARNING: If the misting chamber is

left assembled to the humidiﬁ er, it may

take up to an hour before the heating

element is sufﬁ ciently cool to be

touched.

This humidifier heats the water producing a

clean moisture. Some of the impurities from the

water are collected in the Heating Chamber. The

Electronic Thermal Control Heating element is

lined with a coating that is designed to provide

the easiest cleaning to prolong the operating

efficiency of the humidifier.

DO NOT use any metal or hard objects to clean

the Heating Element. The coating can be

scratched if cleaned improperly.

Never use detergents, gasoline, kerosene, glass

cleaner, furniture polish, paint thinner or other

household solvents to clean any part of the

humidifier.

De-scaling Maintenance

Scale needs to be removed as it becomes

noticeable.

1. Repeat steps 1-3 in the Maintenance

section.

2. Clean the base by partially ﬁ lling the tray

with 200ml of undiluted white vinegar. If the

element is heavily scaled, plug the humidiﬁ er

into an electrical socket and turn it ON for no

longer than 15 seconds. After this time turn

the humidiﬁ er OFF and unplug it from the

electrical outlet.

Let solution stand 20 minutes, cleaning all

interior surfaces with a soft brush. Dampen

a cloth with undiluted white vinegar and wipe

out entire tray to remove scale.

3. Rinse with clean warm water to remove

scale and the white vinegar solution before

beginning to disinfect the tank.

4. Wipe the heating element clean with a soft

cloth after it has had a chance to cool.

Disinfect tank:

1. Fill tank with 1/2 teaspoon of bleach and 2

litres of water.

2. Let the solution stand for 20 minutes,

swishing every few minutes. Wet all

surfaces.

3. Empty the tank after 20 minutes, and rinse

well with water until the bleach smell is gone.

Dry with some paper towel.

4. Reﬁ ll the water tank with cool water;

replace the water tank. Repeat Operating

Instructions.

Storage Instructions

If your humidifier will not be in use for two days

or more, or at the end of the season follow these

instructions.

1. Clean, rinse and thoroughly dry the

humidiﬁ er as directed in the De-scaling

Maintenance section. DO NOT leave any

water inside the base or tank.

2. Remove the reservoir cap on the tank. Do

not store with the reservoir cap in place.

3. Place the humidiﬁ er in the original carton

and store in a cool, dry place.

4. Clean the humidiﬁ er before the next season

begins.

SERVICE INSTRUCTIONS

1. Do NOT attempt to repair or adjust any

electrical or mechanical functions on

this unit. Doing so will void the warranty.

The insides of the unit contain no user

serviceable parts. Only qualiﬁ ed personnel

should perform all servicing.

2. Should the unit stop working, ﬁ rst check

the fuse in the plug (UK only) or fuse/circuit

breaker at the distribution board is operating,

before contacting the manufacturer or

service agent.

3. If you need to exchange the unit, please

return it in its original carton, with a sales

receipt, to the store where you purchased it.

4. Should your humidiﬁ er require service,

please contact your local dealer.

ACCESSORIES FOR MODEL

• We recommend the use of a Bionaire

Hygrometer/Thermometer, model no: BT400,

to read the indoor room temperature and

humidity level.

TECHNICAL SPECIFICATIONS

Input voltage: 220-240 V~ 50 Hz

Power consumption: 400 Watts

Holmes Products (Europe) Ltd. reserves the

right to change or modify any specifications

without notice.

FOR U.K. AND IRELAND ONLY

If the plug is not suitable for the socket outlets in

your home:

• Please do not attempt to remove plug and

replace. This plug is sealed and you cannot

gain access to the wires.

• In the unlikely event the plug fails, please

check fuse and replace with a 3A fuse which

needs to be BSI or ASTA approved to the

BS13623 standard.

If you still have problem, please contact the UK

Customer Service helpline on 0800 052 3615.

4 5

TROUBLESHOOTING

TROUBLE PROBABLE CAUSE SOLUTION

• Unit does not

turn on.

☛ Not plugged in.

☛ Outlet not functioning.

✔ Plug in unit.

✔ Have outlet replaced by a licensed

electrician.

• Reﬁ ll/

Reset light

illuminated.

☛ Water Tank Empty.

☛ Unit not reset after reﬁ ll.

☛ Scale buildup on heating element.

✔ Reﬁ ll Tank.

✔ Follow manual for Reset Instructions.

✔ Remove scale from heating element.

• Mist output

minimal to

none.

☛ Scale buildup on heating element.

☛ Humidiﬁ er is not warmed up yet.

✔ Remove scale from heating element

✔ Allow 10 minutes for the humidiﬁ er

to warm up.

• Water Leaks

from tank.

☛ Tank rubber ring is missing.

☛ Cap not tight enough.

☛ Tank water is Hot.

✔ Remove tank cap and replace or

reposition ring.

✔ Tighten the cap.

✔ Fill with cool water only.

• Crack in Tank.

☛ Hot water will cause tank to

pressurize.

☛ Tanks will crack if hit or

dropped.

✔ Fill with cool water only.

✔

Handle tank with Care.

• Film on tank.

☛ Mineral deposits.

✔ Clean/disinfect tank as instructed in

cleaning instructions.

BWM5251-I_10MLM2.indd 7-8BWM5251-I_10MLM2.indd 7-8 4/26/10 3:48:45 PM4/26/10 3:48:45 PM

Bionaire BWM5251 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info