648009

BionX S-series Seite 14

14
Zoom out
Zoom in
Vorherige Seite
1/17
Nächste Seite
26 27
Installing the rear wheel
1
Guide the rear wheel axle into the dropouts and ensure that the brake disc (on models with disc
brakes) is inserted between the brake pads. Ensure that the torque reaction collar is aligned so that it
fits into the left dropout (no illustration). Make sure the axle is inserted all the way into the dropouts
2
Tighten the axle nuts to 40Nm (30lb-ft) (= VERY TIGHT!). This torque is essential for the correct func-
tion of the propulsion system. If you do not have a torque wrench, use a normal wrench, and then
have your dealer check the torque of the axle nuts as soon as possible. Use only the original axle nuts;
otherwise you run the risk of damaging the axle threads
3
Connect the cables (POWER
A
before COMMUNICATION
B
)
4
Keep the motor cables clear of the brake disc (on models with disc brakes) and the motor casing
5
Re-install the cable of the rear wheel brake (rim brakes only), and correctly adjust the rear wheel brake
(no illustration)
6
Place the larger neoprene cover over the plug-in connections, and the smaller neoprene cover closer to
the disc/motor to prevent the cables from contacting any moving portions of the motor
00
ODOMETER
.0
1234.5 km
km/h
00
.0
km/h
ODOMETER
1234.5
km
TRIP
0.5
km
Installing the rear wheel with 142mm axle
A D-Series motor with 142mm axle is supplied with 2
bolts in place of the standard axle nuts.
The specified torque is 20Nm (15lb-ft).
Maintenance and Care
We recommend to have the spoke tension of the rear wheel and the torque of all screws checked by a
qualified dealer after the first 200km (125 miles).
In order to ensure extended use of the propulsion system, all plug-in contacts of the system should be
checked every two to three months and cleaned with a soft and dry brush, if necessary. It must be ensured
that no dirt or humidity penetrates the battery docking station when the battery is removed. The BionX
motor does not require maintenance.
15mm
15mm
40Nm
(30lb-ft)
15mm
15mm
40Nm
(30lb-ft)
15mm
15mm
40Nm
(30lb-ft)
A
B
2
3
4
6
Optimizing the Range of the Battery
The following factors influence the range of your battery:
1. Climbing
Riding up steep hills requires much more energy than riding on flat ground. More effort, proper cadence,
and/or a change to a more gradual route can greatly affect overall range.
2. Level of assistance
Choose the level of assist required based on riding conditions, rather than just riding in one particular level
all the time. Remember that energy consumption more than doubles from level 2 assist to level 4. Limit
the use of the throttle as much as possible to reduce energy consumption.
3. Battery state of charge
Make sure the battery is fully charged before every ride. This will provide the best possible range from the
battery each time.
4. Weight and load capacity
A heavier bike (and rider) lowers the range of the battery. Every ounce counts! Limit your cargo, think
about getting an efficient type of bicycle for the system, even what type of gear you wear.
5. Tire pressure
Tires with pressure that is low will have increased rolling resistance, and require more energy from the
battery. It is important to regularly check your tire pressure, the max. pressure is typically written on the
sidewall of any tire. Slick, skinny, high pressure tires offer the most efficiency for you and your battery.
6. Acceleration and constant speed
It is important to ride efficiently; electric propulsion systems consume more energy when accelerating
from a stand still. Try to keep your speed constant and retain momentum, starts and stops greatly affect
your overall range.
7. Outside influences/weather
You will notice some difference in range when it is very hot or cold outside, this influences how quickly
the battery will discharge. Headwinds can also greatly affect system performance. Expect more range on
days with moderate climate.
8. Cadence and Shifting
Keeping your cadence high (between 80-90 rpm) is the most efficient pedaling range for most cyclists. A
high pedaling rate in combination with the lowest level of assist will offer the most range, the more slowly
you pedal and the more you rely on the electric assist, the less range you will get. Use your shifters to ride
efficiently, just as you would with any other bicycle!
CAUTION
It is essential that the axle bolts are tight-
ened to 20Nm (15lb-ft); this assures that the
propulsion system functions properly.
english
english
… 14 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

bionx-s-series

Suche zurücksetzen

  • Habe von BionX ein Akku 3800, Zellentausch wurde gemacht, aber da Rücklicht leuchtet nicht.
    woran kann es liegen Eingereicht am 25-12-2022 09:15

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BionX S-series wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von BionX S-series

BionX S-series Bedienungsanleitung - Deutsch - 18 seiten

BionX S-series Bedienungsanleitung - Französisch - 17 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info