Bedienungsanleitung Bissell Lift-Off Steam mop 23K5 (Seite 6 von 7) (Englisch)

621986

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

Cleaning hard floors

Your Lift-Off Steam Mop is designed to

clean hard flooring such as ceramic tile,

vinyl, laminate, marble, stone and sealed

hard wood floors. Use of your Lift-Off

Steam Mop on waxed or some unwaxed

floors may result in a diminished glossiness.

The Lift-Off Steam Mop is not for use on

unsealed wood floors. For best results test

in an inconspicuous area and check the care

instructions from your flooring manufacturer.

1. When the ready light illuminates, begin

cleaning by slowly passing over surface while

pressing the steam on demand trigger to

emit steam as needed.

2. To sanitise an area of your floor, (attack

invisible germs and bacteria) place the

centre of the Lift-Off Steam Mop over the

spot and apply steam for a minimum of 15

seconds, but no longer than 20 seconds. For

larger areas, overlap swivel head placement.

Important: Sanitising on timber floors is not

recommended, as prolonged application

of steam in one area increases the risk of

damage to the surface treatment of timber

floors, especially in areas with regular foot

traffic and direct sunlight, which will wear

down timber floor surface treatments,

making it more susceptible to steam

damage. See CAUTION to the right.

3. When the Lift-Off Steam Mop stops

emitting steam, simply remove the water

tank, refill, and continue cleaning.

NOTE: upon first use of this steam product

or first use of a new filter, the pump may

make a “knocking” sound while the filter

fills with water. This sound is normal and

may last up to one minute. Continue to

depress the trigger until the knocking

sound subsides and the unit emits steam.

Steam cleaning all living areas

Stubborn messes that resist traditional

water and cleaning solutions can be

removed with steam. Toothpaste or hair

spray on the bathroom sink, soap scum on

sliding shower walls—steam makes all these

far easier to clean.

1. Fill the water tank with cool tap water or

distilled/demineralised water and replace

back on Detachable Steam Pod.

2. Remove Steam Pod by pressing the pod

release button on the top of the carry handle

and pulling the pod out and away from the

lower base.

3. Remove cable from pod and connect the

plug to an appropriate electrical socket.

4. Remove hose from pod by pressing the

clip at the end of the hose where it connects

to the detachable pod.

5. Connect desired tool to the end

of the hose.

a. Circular Detail Brushes Attach to end

of the hose for scrubbing stubborn soil

and hard to reach areas. Brushes are

colour-coded for specific use (red for

bathrooms and black for kitchen).

b. Grout Brush Attach to end of

the hose for scrubbing small cracks

and crevices.

c. Flat Surface Microfibre pad Cleaning

Tool Attach flat surface tool with

pad to the end of the adapter. Attach to

the end of the hose for cleaning large

flat surfaces.

d. Window Squeegee Attach the

Window Squeegee to the end of the

adapter. Attach to the end of the hose.

6. When blue ready light turns on, the

steamer is ready to use.

7. To activate steam, press the pod release

button on the top of the carry handle. To stop

steaming, release the pod release button.

Maintenance & Care

When you’re done

1. Unplug power cable from electrical socket.

2. Carefully remove mop pad from swivel

head, as mop pad and lower assembly will

be hot.

3. Any water remaining in the water tank

should be emptied prior to machine storage.

4. Mop pad can be machine washed in warm

water. Use only liquid detergents. Do not use

bleach or fabric softeners; for best results,

air dry.

5. Wrap power cable around quick release

cable wrap on side of Detachable Steam Pod.

Replacing the water filter

If you fill your Lift-Off Steam Mop cleaner

with normal tap water, it is essential to check

the water purification system and replace it

when it is no longer effective. Change the

filter when the bright green grains turn blue.

If the filter is not changed at the appropriate

time, calcium deposits will accumulate on

the heating element, causing damage or

reduced performance.

Using distilled or demineralised water will

maximise the performance of your filter.

To order a replacement water purification

system, visit www.BISSELL.com.

www.BISSELL.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bissell Lift-Off Steam mop 23K5 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bissell Lift-Off Steam mop 23K5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info