Bedienungsanleitung Black Decker 374456N (Seite 29 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

445764

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ENGLISH

it and give the blade time to pursue its path. Use the

mark (17) for straight cuts or the mark (18) for mitring

cuts, to keep to the line you have drawn.

MAINTENANCE OF THE WINDOW

From time to time, it may become necessary to remove

cutting debris/dust from the inside of your circular saw

window.

To do this, proceed as follows:

Disconnect the plug from the electricity supply.

Slide the window lever

(2) forward to expose

the soiled portion of the

window.

Take a clean, lint free

cloth and proceed to

wipe the exposed part of

the window as required.

When finished, simply slide the lever back towards the

rear of the saw guard in order to restore the window

into its operating position.

Note: If necessary, use only mild soap to clean your

saw as many household cleaners contain chemicals

which could seriously damage the plastic. Also, do not

use petrol, turpentine, laquer or paint thinners or

simular products. Never let any liquid get inside your

circular saw and never immerse any part of it into liquid.

REPLACING THE CARBON BRUSHES

Proceed as follows:

Disconnect the plug from the electricity supply.

Unscrew the brush cover (11). Withdraw the carbon

brush and holder. Remove the carbon brush from the

brush holder. Insert the new carbon brush in the brush

holder. Insert the carbon brush and brush holder in

the housing. Fit the brush covers.

Note: Replace the brushes in pairs and ensure used

brushes and brush holders are fitted in the same

positions as when removed.

SAWDUST REMOVAL

For sawdust removal,

you can use a vacuum

cleaner with a

conventional flexible

connection inserted in

the dust collection

outlet.

HANDY HINTS

Some splintering is inevitable on the topside line of cut.

It is therefore desirable to cut on the side of the

workpiece where splintering is acceptable. This is

especially important when cutting laminates.

TOOL CARE

• Guide your circular saw but do not force it through

the work. Applying excessive pressure can cause

your circular saw to overheat. If your circular saw

becomes too hot, operate it off-load for 2 minutes.

• Always keep the air cooling vents on the motor

housing clear.

EC DECLARATION OF CONFORMITY

We declare that units:

CD600, KS227, KS840, KS846N, KS850N,

KS855N, KS865N, KS865KN, 374456N

conform to 89/392/EEC, 89/336/EEC, EN55014,

73/23/EEC, EN55104, EN50144, EN61000

A weighted sound pressure 92.7dB (A)

A weighted sound power 102.1dB (A)

Hand/arm weighted vibration <2.5m/s

Brian Cooke - Director of Engineering

Black & Decker Ltd, Spennymoor, County Durham

DL16 6JG United Kingdom

The Black & Decker policy is one of continuous

improvement to our product and as such we reserve

the right to change the product specification without

prior notice.

CD600 Circ saw ML p01-41 07/01/2000, 3:43 pm29

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker 374456N Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker 374456N

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info