Bedienungsanleitung Black Decker ATM100 (Seite 3 von 32) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

53575

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Intended use

This Black & Decker tool has been designed to measure distances

in DIY applications. This tool is intended for consumer use only.

Safety instructions

◆ Warning! When using battery-powered tools, basic

safety precautions, including the following, should always

be followed to reduce the risk of fire, leaking batteries,

personal injury and material damage.

◆ Read all of this manual carefully before operating the tool.

◆ Retain this manual for future reference.

Keep work area clean

Cluttered areas and benches can cause accidents.

Consider work area environment

Do not expose the tool to rain. Do not use the tool in damp or

wet conditions. Keep the work area well lit. Do not use the

tool where there is a risk of causing fire or explosion, e.g. in

the presence of flammable liquids and gases.

Keep children away

Do not allow children, visitors or animals to come near the

work area or to touch the tool.

Do not overreach

Keep proper footing and balance at all times.

Stay alert

Watch what you are doing. Use common sense.

Do not operate the tool when you are tired.

Use appropriate tool

The intended use is described in this instruction manual.

Warning! The use of any accessory or attachment or

performance of any operation with this tool other than those

recommended in this instruction manual may present a risk of

personal injury.

Check for damaged parts

Before use, carefully check the tool for damage. Ensure that

the tool will operate properly and perform its intended

function. Do not use the tool if any part is damaged or defective.

Store idle tools

When not in use, tools and batteries should be stored in a dry,

locked up or high place, out of reach of children.

Repairs

This tool complies with relevant safety requirements.

Repairs should only be carried out by qualified persons using

original spare parts; otherwise this may result in considerable

danger to the user.

Additional safety instructions for non-rechargeable

batteries

◆ Never attempt to open for any reason.

◆ Do not store in locations where the temperature may

exceed 40 °C.

◆ When disposing of batteries, follow the instructions given

in the section “Protecting the environment”.

Do not incinerate the batteries.

◆ Under extreme conditions, battery leakage may occur.

When you notice liquid on the batteries, proceed as follows:

- Carefully wipe the liquid off using a cloth.

Avoid skin contact.

Features

1. Forward/reverse button

2. Manual retraction button

3. Battery cover

4. Belt clip

Assembly

Fitting the batteries (fig. A)

Warning! Use AAA size batteries only. Use alkaline batteries

only.

◆ Slide the battery cover (3) off the tool.

◆ Insert the batteries into the tool in the orientation as shown.

◆ Refit the cover and let it click into place.

Use

◆ To extend the tape, push the button (1) forward.

◆ To retract the tape, push the button (1) backward.

◆ For manual retraction, slide the manual retraction button (2)

to the back end of the tool.

◆ Warning! Keep your fingers away from the tape on

retraction.

◆ Do not retract long pieces of tape in one go on manual

retraction. Actuate the button (2) as necessay to control

the speed of retraction.

◆ If the batteries are low, the tool can always be operated

like a conventional tape measure.

Cleaning and maintenance

Your tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

◆ To clean the tool, use only mild soap and a damp cloth.

Never let any liquid get inside the tool and never immerse

any part of the tool into liquid.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker ATM100 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info