Bedienungsanleitung Black Decker BDCCS18 (Seite 8 von 12) (Englisch)

709470

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

ENGLISH

(Original instructions)

ENGLISH

(Original instructions)

u If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised BLACK+DECKER Service

Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1. Main handle

2. Lock-off button

3. On/Off trigger

4. Battery (may not be included)

5. Shoe

6. Depth adjustment knob

7. Secondary handle

8. Upper Guard

9. Bevel adjustment scale

10. Blade

11. Lower blade guard

12. Depth adjustment scale

13. Locking tool

14. Dust extraction port

15. Bevel adjustment knob

16. Spindle lock

Assembly

Warning! Before attempting any of the following operations,

make sure that the tool is switched off and unplugged and that

the saw blade has stopped.

To install the battery pack (g. A)

u Insert battery pack into tool as shown in gure A. Ensure

battery pack is fully seated and fully latched into position.

To Remove the battery pack (g. B)

u Depress the battery release button as shown in gure B.

and pull battery pack out of tool.

Supporting large panels/Securing workpiece (g. C)

u Support large panels to minimize the risk of blade

pinching and kickback. Large panels tend to sag under

their own weight as shown in gure C.

u Supports must be placed under the panel on both

sides, near the line of cut and near the edge of the

panel gure C.

u Never hold piece being cut in your hands or across

your leg gure D.

u Secure the workpiece to a stable platform as shown in

gure E. It is important to support the work properly to

minimize body exposure, blade binding, or loss of control.

Cutting Depth Adjustment - (g. F - G)

u The depth of cut should be set according to the

thickness of the workpiece.

u Loosen the depth adjustment knob (6) to unlock the

saw shoe (5) as shown in figure F.

u Move the saw shoe into the desired position. The

corresponding depth of cut can be read from the scale

(12).

u Set depth adjustment of saw such that one tooth (10)

of the blade projects below the workpiece (16) as

shown in figure G.

u Tighten the knob to lock the saw shoe in place.

Bevel Angle Adjustment - (g. K)

This tool can be set to bevel angles between 0° and 50°.

u Loosen the bevel adjustment knob (14) to unlock the

saw shoe (5).

u Move the saw shoe (5) into the desired position. The

corresponding bevel angle can be read from the scale (9).

u Tighten the bevel adjustment knob (15) to lock the

saw shoe in place.

u Conrm the accuracy of the setting by checking the

bevel angle of an actual cut on a scrap piece of material.

Shoe Adjustment For 90° Cuts

The shoe (5) has been set by the factory to assure that

the blade is perpendicular to the shoe at 0° bevel setting.

IF REALIGNMENT IS NEEDED:

u Adjust the saw to 0° bevel.

u Retract blade guard (11).

u Loosen bevel adjustment knob (15). Place a square

against the blade (10) and shoe (5) to adjust the 90° set-

ting.

u Loosen jam nut (16) and move the adjustment screw (19)

(inset gure H) so that the shoe will stop at the proper

angle. Retighten jam nut against the shoe while holding

adjustment screw in position.

u Conrm the accuracy of the setting by checking the

squareness of an actual cut on a scrap piece of material.

Attaching and Removing the Blade (g. I - J)

u Retract lower guard and assemble blade (10) and clamp

washer (20) as shown in gure I.

u Depress the spindle lock (16) while turning the blade

bolt (21) with the locking tool (13) until the blade lock

engages and the blade stops rotating.

NOTE: Locking tool is stored on the saw as shown

in gure J.

u Tighten the blade bolt securely with the locking tool.

NOTE: Bolt has a left-handed thread. To loosen, turn

clockwise. To tighten, turn counterclockwise.

NOTE: Never engage the blade lock while the saw is

running, or engage in an effort to stop the tool.

Never turn the tool on while the blade lock is engaged.

Serious damage to your saw will result.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker BDCCS18 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info