Bedienungsanleitung Black Decker BDM200L (Seite 4 von 44) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

53593

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

ENGLISH

4. Edge guide

5. Manual retraction button

6. Battery cover

7. Belt clip

Assembly

Warning! Make sure that the tool is switched off.

Fitting the batteries (fig. A)

Warning! Use LR44 battery cells only.

◆ Open the battery cover (6).

◆ Insert the batteries into the tool in the orientation as shown.

◆ Close the cover and let it click into place.

Using the edge guide (fig. B)

The edge guide (4) is used to project the laser line square to

the edge of the workpiece.

◆ For left-handed use, slide out the guide located at the left

side.

◆ For right-handed use, slide out the guide located at the

right side.

Rotating the laser head (fig. C & D)

The laser head (2) can be rotated to allow projection of the

laser line in both directions.

◆ While holding the tool with one hand, use the thumb and

index finger of your other hand to rotate the head.

◆ Make sure to control the spring pressure once the head is

halfway.

◆ Gently let the head jump into its position.

Use

◆ To extend the tape, pull the tape hook (3).

◆ To retract the tape, press the retract button (5).

Warning! Keep your fingers away from the tape on retraction.

◆ Do not retract long pieces of tape in one go.

Dab the button (5) to control the speed of retraction.

Using the laser function

The laser line extends the measurement across the workpiece

to aid in marking out prior to sawing applications.

Switching on and off

◆ To switch on, slide the switch (1) into position I.

◆ To switch off, slide the switch (1) into position 0.

Hints for optimum use

The laser line also provides support in surface layout of

materials and/or objects at equal distances (fig. E).

Cleaning and maintenance

Your tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

◆ To clean the tool, use only mild soap and a damp cloth.

Never let any liquid get inside the tool and never immerse

any part of the tool into liquid.

Checking and calibrating the laser head (fig. D)

The laser head (2) is factory-adjusted and does not require

adjustment before first use.

However, if the tool has received rough treatment during use,

and the laser line is out of alignment, the laser head can be

calibrated as follows.

◆ Place the tool close to the square corner of a worktop.

Place the tool flush to the edge of the worktop using the

edge guide.

◆ Check that the laser line aligns with the square edge.

◆ If adjustment is required, proceed as follows:

◆ Turn the screw (8) in or out as necessary, until the laser

line aligns with the square edge.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you find one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product

available for separate collection.

Separate collection of used products and packaging

allows materials to be recycled and used again.

Re-use of recycled materials helps prevent

environmental pollution and reduces the demand for

raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and

recycling of Black & Decker products once they have reached

the end of their working life. To take advantage of this service

please return your product to any authorised repair agent who

will collect them on our behalf.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker BDM200L Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info