Bedienungsanleitung Black Decker BDPE400 TH1 (Seite 5 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

578626

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISH

(Original instructions)

Note: Do not over ll the paint reservoir syringe (3)

u Remove the paint reservoir syringe (3) from the ll sleeve

(8).

Note: Wipe any excess paint from the syringe before reinsert-

ing into the Speedy Edge.

Note: The ll sleeve will stand up and can be stored on the lid

of your paint tin between lls.

Painting with the Speedy Edge

Note: It is not necessary to mask around door and window

frames when using Speedy Edge, however the use of dust

sheets to cover oors and furniture is recommended.

u Fit the paint applicator (1).

u Set the ow control knob (6) to the minimum ow setting

by turning it anti-clockwise.

u Fill the paint reservoir syringe (3).

u Fit the paint reservoir syringe (3).

u Pull the trigger (5), paint will start to ow slowly into the

paint applicator.

u Increase the ow of paint to the desired amount by turning

the ow control know (6) clockwise.

Note: Once paint is showing on the paint applicators foam

pad it is ready to use..

u Keeping the paint applicator (1) at against the wall, pull

the trigger and slowly move the Speedy Edge along the

edge you are cutting in.

u Increase the ow of paint to the desired amount by turning

the ow control know (6) clockwise.

Note: Alter both the ow of paint and the speed at which you

move the Speedy Edge to get the best results.

Hints for optimum use

u Always hold the paint applicator at against the surface.

u Always hold the Speedy Edge horizontal to the wall.

u The Speedy Edge can be angle left or right to enable a

clear view of the edge being painted.

u Always use steady movements.

u As required, wipe excess paint from the edges of the paint

applicator.

u If the paint applicator is sliding on the surface, apply less

paint by turning the ow control knob anti-clockwise.

u When not in use, pull the plunger drive (4) to the back of

the main body of the Speedy Edge and clip it in place.

u When leaving the Speedy Edge unattended for a longer

period of time, wrap the paint applicator in a plastic bag to

prevent drying, removing as much air as possible from the

bag.

u Make sure the type of paint you use can be cleaned with a

warm water and soap solution (for water soluble paints)

Returning excess paint to paint tin

u Pull the plunger drive (4) to the back of the main body of

the Speedy Edge and clip it in place.

u Slide the paint reservoir syringe (3) out of the main body

of the Speedy Edge.

u Hold the syringe over the paint tin and gently push down

on the plunger to return paint to the tin.

Note: Wear disposable gloves to keep your hands clean.

Maintenance and cleaning

Your Black & Decker cordless appliance has been designed

to operate over a long period of time with a minimum of main-

tenance. Continuous satisfactory operation depends upon

proper appliance care and regular cleaning.

Warning! Before performing any maintenance or cleaning on

cordless appliances switch off and remove the battery from

the appliance.

u Dispose of used accessories and unused paint products in

accordance with local regulations.

u The paint applicator should be removed when storing the

product.

u Wipe the Speedy Edge main body over using a soft damp

cloth.

u For stubborn marks you can use a mild solution of soap

and water to dampen your cloth.

u All removable parts can be washed in warm soapy water,

however this will have a negative affect on the perform-

ance on your tool. To maintain the highest level of per-

formance the paint applicator and paint reservoir syringe

should be replaced after every job.

Accessories

The performance of your tool depends on the accessory used.

Black & Decker accessories are engineered to high quality

standards and designed to enhance the performance of your

tool. By using these accessories you will get the very best

from your tool.

u Accessory numbers BDPE401

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you nd one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product avail-

able for separate collection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker BDPE400 TH1 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info