Bedienungsanleitung Black Decker BDPS600 T1 (Seite 10 von 128) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

578630

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

ENGLISH

(Original instructions)

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Attaching the side ll canister (g. A)

The side ll canister is designed so it will only t one way

round.

u Align the side ll canister (6) below the pick up tube (19)

with the lid (7) to the left.

u Push the side ll canister (6) rmly into place.

u Tighten the locking ring (20) by turning it clockwise.

Note: Ensure that the locking ring is tight and that the side ll

canister is rmly secured in place.

Aligning the pickup tube (g. B1 & B2)

The pickup tube can be aligned in the direction that you will be

doing the most spraying to help minimize the amount of times

that you will have to rell the canister.

u If you are spraying at an upward angle or straight on,

position the pickup tube (g. B) toward the back of the

canister.

u If you are spraying at a downward angle, position the

pickup tube (g. C) toward the front of the canister.

This will ensure you spray as much material as possible

before you need to rell.

Attaching and removing the spray nozzels (g. C

& D)

To attach the green fan spray nozzle: (Where supplied)

u Turn the nozzle (10) clockwise onto the spindle for 6 - 8

full turns.

u Push in the nozzle (10) and continue to turn it clockwise

untill it is fully seated.

Note: Ensure the spray nozzle is completely threaded on by

hand only. If it is not fully seated in can leak or damage the

nozzle.

To remove the green fan spray nozzle: (Where supplied)

u Push in the nozzle (10) and turn it anticlockwise.

To attach the blue cone spray nozzle:

u Turn the nozzle (11) clockwise onto the spindle until it is

fully seated.

Note: Ensure the spray nozzle is completely threaded on by

hand only. If it is not fully seated in can leak or damage the

nozzle.

To remove the blue cone spray nozzle:

u Turn the nozzle (11) anticlockwise.

Filling the canister (g. E

u Check to make sure that the side ll canister (6) is com-

pletely screwed onto the sprayer.

u Lay the sprayer on its side with the canister side lid facing

up.

u Pour the properly thinned and strained material to be

sprayed into the side ll canister.

Note : Use a mixing bucket to pour material from the original

material container into the side ll canister.

u Clean any residual liquid from the threads or sides of the

canister and sprayer.

u Starting the threads evenly, screw the lid completely

onto the side ll canister. Check the lid to make sure it is

threaded on squarely and completely before picking up

the sprayer.

Use

Switching on and off

The sprayer is turned on and off with the spray trigger.

u To turn the sprayer on, squeeze the spray trigger (2).

u To turn the sprayer off, release the spray trigger (2).

Warning! Never point the sprayer at any part of the body.

Never pull the trigger while adjusting the spray setting.

Selecting the spray pattern (g. F & G) (BDPS400 &

BDPS600 Only

This sprayer is supplied with 2 nozzles which are capable of

producing 3 spray patterns. .

Green nozzle - Horizontal Flat Jet - Apply up and down

a surface.

Green nozzle - Vertical Flat Jet - Apply side to side.

Blue nozzle - Circular Jet - for corners, edges and narrow

surfaces.

u To select the cone spray pattern, t the blue cone nozzle.

u To select the horizontal fan spray pattern, t the green fan

spray nozzle and turn the nozzle so so the jet indicator

tabs (21) are in the vertical position (g. F).

u To select the Vertical fan spray pattern, t the green fan

spray nozzle and turn the nozzle so so the jet indicator

tabs (21) are in the horizontal position (g. G).

Warning! Never point the sprayer at any part of the body.

Never pull the trigger while adjusting the spray setting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker BDPS600 T1 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker BDPS600 T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info