Bedienungsanleitung Black Decker BDV212F (Seite 4 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

53605

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ENGLISH

but the temperature will eventually rise to that of the

surrounding air.

X Observe hygiene rules common to any food preparation

appliance. Do not eat or drink perishable items that may

have spoiled or become contaminated.

X Clean the appliance thoroughly after use and before

subsequent uses.

Features

This appliance includes some or all of the following features:

1. Low vehicle battery LED indicator

2. Hot LED indicator

3. Cold LED indicator

4. On/off switch

5. Padded top

6. Storage pouch

7. Built-in heat dissipation fan

8. Vehicle dc power cord

USE

Connecting to a portable 12 Vdc power supply, for use away

from the vehicle (fig.A)

X Move the COLD/OFF/HOT switch (4) to the OFF position.

X Insert the 12 Vdc plug on the power cord (8) into the 12 Vdc

socket on the portable power supply.

Note: Keep the COLD/OFF/HOT switch (4) in OFF position for

five minutes before switching between HOT and COLD.

Using the appliance as a cooler

X Move the COLD/OFF/HOT switch (4) to the OFF position.

Start the vehicle or turn the ignition switch to the

"accessory" position.

X Insert the 12 Vdc plug on the power cord (8) into the

vehicle's 12 Vdc accessory outlet.

X Move the COLD/OFF/HOT switch (4) to the COLD position.

X The COLD LED indicator (3) will light to show that the unit

is cooling.

X Place items into the cooler and close the lid. Do not overfill

the cooler, make sure that the lid can close.

X Keep the cooler lid closed during use and close it quickly

after adding or removing items.

X After use, move the COLD/OFF/HOT switch (4) to the OFF

position and remove all food items.

X Disconnect the vehicle dc power cord (8) from the vehicle's

accessory outlet.

X Clean the unit as described in the Maintenance section.

Using the appliance as a warmer (fig. A)

X Move the COLD/OFF/HOT switch (4) to the OFF position.

Start the vehicle, or turn the ignition switch to the

"accessory" position.

X Insert the 12 Vdc plug on the power cord (8) into the

vehicle's 12 Vdc accessory outlet.

X Move the COLD/OFF/HOT switch (4) to the HOT position.

X The HOT LED indicator (2) will light to show that the unit is

warming.

X Put items into the warmer and close the lid. Do not overfill

the warmer. Make sure that the lid can close.

X The unit's warming system is thermostatically controlled.

X Keep the warmer lid closed during use, and close it quickly

after adding or removing items.

X After use, move the COLD/OFF/HOT switch (4) to the OFF

position and remove all food items.

X Disconnect the vehicle dc power cord (8) from the vehicle's

accessory outlet.

X Clean the unit as described in the Maintenance section.

To change this appliance to a freezer (fig B)

X Fill the sealable ice tray (9) (included) a quarter full with

water. Fit the lid and place the tray at the bottom of the

cooler.

X Place the freezer insulation pad (10) (included) on top of the

sealed ice tray to convert the cooler to a freezer.

Hints for optimum use

The warmer takes about 100-120 minutes to reach its

maximum warm temperature (approx. 48 ºC). It is

recommended that items to be stored in the warmer be pre-

heated. This will assist the warmer in reaching the maximum

temperature as quickly as possible.

The cooler takes about 120-200 minutes to reach its

maximum cool temperature (approximately 27 ºC below that

of surrounding air). It is recommended that items to be

placed in the cooler be pre-chilled. This will assist the cooler

in reaching the lowest temperature as quickly as possible.

The travel cooler/freezer and warmer can be used with most

food and drinks, either cold or hot. Use with standard

household containers or ready-to-use food and drink

packaging.

MAINTENANCE

Your Black & Decker tool has been designed to operate over

a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper tool

care and regular cleaning.

Warning! Before performing any maintenance or cleaning on

the appliance, unplug the appliance.

X From time to time wipe the appliance with a damp cloth.

Do not use any abrasive or solvent-based cleaner. Do not

immerse the appliance in water.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker BDV212F Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info