709486
8
Zoom out
Zoom in
Vorherige Seite
1/108
Nächste Seite
8
ENGLISH
(Original instructions)
Never cross gravel paths or roads
while the machine is running.
Do not to touch moving hazardous
parts before the machine is
disconnected from the mains and the
moving hazardous parts have come to
a complete stop.
Never touch the cutting line while the
machine is running.
Do not put the machine down until the
cutting line has come to a complete
standstill.
Use only the appropriate type of
cutting line. Never use metal cutting
line or shing line.
Be careful not to touch the line
trimming blade.
Take care to keep the mains cable
away from the cutting line.
Always be aware of the position of the
cable.
Keep hands and feet away from the
cutting line at all times, especially
when switching on the motor.
Never operate the machine with
damaged guards or without guards in
place.
Take care against injury from any
device tted for trimming the lament
line length.
After extending new cutter line always
return the machine to its
normal operating position before
switching on.
Do not use the lawn trimmer (edge
trimmer), if the cords are damaged or
worn.
Keep extension cords away from
cutting elements.
Electrical safety
#
This machine is double insu-
lated; therefore no earth wire is
required. Always check that the
power supply corresponds to the
voltage on the rating plate.
If the supply cord is damaged, it must
be replaced by the manufacturer or an
authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Electric safety can be further improved
by using a highsensitivity 30 mA
Residual Current Device (RCD).
Using an extension cable
Always use an approved extension
cable suitable for the power input of this
tool (see technical data). The extension
cable must be suitable for outdoor use
and marked accordingly. Up to 30 m
of 1.5 mm2 HO5VV-F extension cable
can be used without loss of product
performance. Before use, inspect the
extension cable for signs of damage,
wear and ageing. Replace the extension
cable if damaged or defective. When
using a cable reel, always unwind the
cable completely.
Labels on machine
The following warning symbols are found on the machine
along with the date code:
Warning! Read the manual prior to operation.
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Black Decker BESTA525 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info