Bedienungsanleitung Black Decker BHFEV362DP (Seite 9 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

743302

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

ENGLISH

(Original instructions)

u Align the top of the accessory tool (10), (11), (13) or (14)

with the vacuum inlet (16) or extension tube connection

(9a) and push into place so it locks into position as shown

in gure G.

14 Wide mouth dust brush √

10 2 in 1 Accessory √√√

11 Crevice tool

12 Accessory storage clip √√√

13 Pet hair tool √

BHFEV362D

u All available through service department.

Cleaning and emptying the vacuum

Filter sense

Whenever a lter is Blocked and needs cleaning, the red

lter LED (3) in the chassis will illuminate.

Filter agitator (Fig. H)

With the lift away dust canister (6) off the chassis (17) ,

rotate the lter agitator wheel 5 - 10 times to remove exces-

sive dust from the lter thus increasing its performance.

Note: It is recommended that you agitate when the unit is

emptied and the prelter removed.

Note: Maximum dust collection will only be obtained with

clean lters and an empty dust canister.

If dust begins to fall back out of the product after it is switched

off, this indicates that the dust canister is full and requires

emptying.

To empty the dust canister (Fig. I, J)

u Lift and remove the lift away dust canister (6) from the

chassis (17) as shown in gure I.

u Place the dust canister over a dust bin and press the

dust canister lid release button (6a) to empty the dust

canister as shown in gure J.

u Close the dust canister lid (7), until it “clicks” rmly

into position.

u Install the lift away dust canister (6) back onto the

chassis (17).

Removing pre-lter (Fig. K)

u Lift and remove the lift away dust canister (6) from the

chassis (17) as shown in gure I.

u Place the dust canister over a trash bin and press the

dust canister lid release button (6a) to empty the dust

canister as shown in gure J.

u Use your index nger and thumb to pinch the pre-lter

(18), pull the pre-lter (18 ) from the dust canister (6) as

shown in gure K.

Note: The lter housing ts snuggly in the dust canister

and may be difcult to remove at rst.

u Empty the dust canister.

u Install the pre-lter (18) into the dust canister (6)

ensuring the dust canister tab (20) aligns with the prelter

slot (19) as shown in gure K.

u Install the dust canister onto the vacuum, until it “clicks”

rmly into position.

Removing lter (Fig. L)

u Lift and remove the lift away dust canister (6) from the

chassis (17) as shown in gure I.

u Place the dust canister over a trash bin and press the

dust canister lid release button (6a) to empty the dust

canister as shown in gure J.

u Grasp the agitator wheel housing (21) and pull up

to remove.

u Remove the lter (22), from the agitator wheel housing

(21) as shown in gure L.

u Shake off or lightly brush any loose dust from the lter.

u Install the the lter (22), into the agitator wheel

housing (21).

u Install the agitator wheel housing (21) onto the dust

canister, until it “clicks” rmly into position.

Cleaning the lters

u Once the lter and pre-lter are removed from the dust

canister shake off or lightly brush any loose dust from

the pre-lter and lter.

u Rinse out the dust canister (6) with warm soapy water.

u Wash the lters with warm soapy water.

u Ensure the lters are completely dry before retting

(24hrs).

u Follow instructions in the “Removing pre-lter and

Removing lter” sections for assembly instructions.

Note: Maximum dust collection will only be obtained with

clean lters and an empty dust canister.

If dust begins to fall back out of the product after it is

switched off, this indicates that the dust canister is full

and requires emptying or that there is a blockage somewhere.

u Wash the lters regularly using warm, soapy water and

ensure that it is completely dry before using again. The

cleaner the lter is, the better the product will perform.

u It is very important that the lters are completely dry

and correctly in position before use.

Removing and clearing the rotary brushes

(Fig. M)

Warning! To reduce the risk of injury from moving parts,

disconnect battery before cleaning or servicing.

u To remove the rotary brush (23) from the oor head (8)

depress the release button (24) as shown in gure M.

u Lift the rotary brush from its locked position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker BHFEV362DP Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info