Bedienungsanleitung Black Decker BL700 T1 (Seite 5 von 28) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

578563

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

ENGLISH

◆ If the power supply cord or mains plug is

damaged or defective it must be repaired by

an authorised repair agent in order to avoid a

hazard. Do not cut the power supply cord and

do not attempt to repair it yourself.

◆ Never attempt to remove or replace any parts

other than those specified in this manual.

ELECTRICAL SAFETY

◆ Before use, check that the mains voltage

corresponds to the voltage on the rating plate.

This appliance is double insulated in

accordance with EN 60335-2-14;

therefore no earth wire is required.

To avoid the risk of electric shock, do not

immerse the cord, plug or motor unit in

water or other liquid.

BEFORE FIRST USE

Assembly

Before assembly, make sure that the

appliance is switched off and unplugged.

Blender

◆ Position the jug on the motor unit, aligning the

arrow on the motor unit with the unlocked

padlock symbol on the jug.

◆ Turn the jug clockwise until it locks into place

and the arrow on the motor unit is aligned with

the locked padlock symbol on the jug.

◆ Place the lid on the jug.

◆ Turn the lid clockwise until it locks into place.

USE

Always place the unit on a flat, clean and

non-slip surface before operating it.

Switching on and off

◆ In order to briefly switch on, turn the speed

control switch to position P. To switch off,

release the switch.

◆ For longer operation, turn the speed control

switch to position 1 (low speed) or 2

(high speed). To switch off, turn the switch to

position 0.

◆ For ice crushing, press the ice-crushing button.

To switch off, release the button.

Do not operate the appliance continuously

for more than 2 minutes. After operating

the appliance continuously for 2 minutes,

let it cool down for at least 10 minutes

before operating it again.

Blending

◆ Set the unit up for blending as described above.

◆ Open the pouring hole or remove the lid.

◆ Add the required ingredients into the jug.

Do not exceed the MAX level (1.5 litres of

liquid or 200 g of solids).

◆ Fit the lid and pouring hole cover onto the jug.

◆ Operate the appliance as described above.

It is recommended to start at low speed, then

change to high speed if necessary.

◆ Turn the jug counterclockwise and lift it off the

motor unit.

◆ Remove the lid.

◆ Pour the ingredients out.

Ice crushing

◆ Set the unit up for blending as described above.

◆ Open the pouring hole.

◆ Pour a small amount of water into the jug.

◆ Keep the ice-crushing button depressed.

◆ Carefully add ice through the pouring hole.

Milling

◆ Add the ingredients to the mill. The maximum

capacity is 100 g of solids.

◆ Fit the mill cover on the mill.

◆ Position the mill on the motor unit, aligning the

arrow on the motor unit with the unlocked

padlock symbol on the mill.

◆ Turn the mill clockwise until it locks into place

and the arrow on the motor unit is aligned with

the locked padlock symbol on the mill.

◆ Operate the appliance as described above.

It is recommended to start at low speed,

then change to high speed if necessary.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker BL700 T1 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info