Bedienungsanleitung Black Decker bxft50003gb (Seite 7 von 12) (Englisch)

778027

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

ENGLISH

(Original instructions)

The Oscillation Function

♦ This unit is complete with a horizontal oscillation

function.

♦ Turn the speed selection dial clockwise to the

corresponding setting to select the desired speed.

Turn this dial to setting <1> for Low speed with

oscillation, or turn it to setting <2> for high speed

with oscillation. The fan will automatically begin

to swing from side to side to show the oscillation

function has been activated.

♦ Turn the speed selection dial to the 0 setting when

the fan is in operation to turn it off. The oscillation

function will stop at its current cooling angle, the

motor will turn off and air will stop emitting from

the front grille to show the unit has been powered

down.

Note! The fan’s position and cooling angle cannot

be manually adjusted. To choose a different cooling

angle, turn the oscillation function on as described

above, wait until the fan is at the desired angle, then

turn the function off.

Cleaning and maintenance

WARNING: Before cleaning and maintenance,

switch the appliance off and remove the plug from

the socket, to prevent electric shock.

♦ Do not immerse any part of the appliance, power

cord or plug in liquids.

♦ Use a soft damp cloth to wipe the surface. Avoid

using detergent, spray or chemicals as these may

cause damage to the appliance.

♦ Clean the inlet and outlet vents with a standard

household vacuum.

♦ Do not use water to clean these parts of the fan.

♦ Do not disassemble the fan for cleaning.

♦ Do not immerse the fan in water and never allow

water to enter the motor housing or any other part

of the appliance.

♦ Do not use gasoline, paint thinner or other

chemicals to clean the fan.

Mains plug replacement

If a new mains plug needs to be tted:

♦ Safely dispose of the old plug.

♦ Connect the brown lead to the live terminal in the

new plug.

♦ Connect the blue lead to the neutral terminal.

♦ If the product is class I (earthed), connect the

green/yellow lead to the earth terminal.

Note! If your product is class II double insulated

(only 2 wires in the cord set), no connection is to be

made to the earth terminal.

Follow the tting instructions supplied with good

quality plugs. Any replacement fuse must be of the

same rating as the original fuse supplied with the

product.

WARNING: The above section on mains plug

replacement is for authorized service centre

persons.

Protecting the environment

Separate collection. Products and

batteries marked with this symbol must

not be disposed of with normal household

waste.

Products and batteries contain materials that can

be recovered or recycled, reducing demand for

raw materials. Please recycle electrical products

and batteries according to local provisions. Further

information is available at www.2helpU.com.

Technical data

BXFt51003GB

Input voltage V AC 220-240V

Frequency Hz 50

Power input W18

Weight KG 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker bxft50003gb Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info