Bedienungsanleitung Black Decker CLM3820 T1 (Seite 15 von 20) (Englisch)

586103

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

ENGLISH

(Original instructions)

Transporting and storage

Warning! The rotating blade can cause serious injury.

Release bail bar to turn mower off and remove the safety key

before lifting, transporting or storing the mower. Store in a dry

place.

Note: The mower will not be as heavy to lift if the battery pack

is removed rst. Do not use the latch as a lift point for the

mower.

Storage

In warm climates, to ensure optimal performance it is recom-

mended that the battery is maintained on constant charge.

The battery may be stored with the charger disconnected if

the following conditions are met.

u The battery is fully charged before storing.

u The average temperature of the storage location is below

10°C (50°F).

Troubleshooting

If your appliance seems not to operate properly, follow the

instructions below. If this does not solve the problem, please

contact your local Black & Decker repair agent.

Warning! Before proceeding, release the bail bar to turn

mower off, wait for the blade to stop and remove the safety

key.

Problem Possible solution

Machine fails to

operate

Check to make sure the safety key has been

installed and is fully seated and that the lock off

button is being completely depressed before

moving the bail handle.

Release the bail handle to turn mower off. Remove

the safety key and battery pack, turn the mower

over and check that the blade is free to turn.

Check that the battery cavity is free of debris and

that the battery is installed properly.

Has the battery been fully charged? Press the state

of charge button. Charge the battery if required.

Motor stops while

mowing.

Release the bail handle to turn mower off. Remove

the safety key and battery pack, turn the mower

over and check that the blade is free to turn.

Raise the cutting height of the wheels to the

highest position and start the mower.

Check that the battery cavity is free of debris and

that the battery is installed properly.

Has the battery been fully charged? Press the state

of charge button. Charge the battery if required.

Avoid overloading the mower. Slow down the

cutting pace, or raise the cut height.

Problem Possible solution

Machine leaves

ragged nish or

motor labours

Has the battery been fully charged? Press the state

of charge button. Charge the battery if required.

Release the bail handle to turn the mower off.

Remove the safety key and battery pack. Turn the

mower over and check:

Blade for sharpness - Keep the blade sharp.

Deck and discharge chute for clogging.

Wheel height adjustment may be set too low for the

grass condition. Raise the cutting height.

Mower is too hard to

push.

Raise the cutting height to reduce deck drag on the

grass. Check each wheel for free rotation.

Mower is abnormally

noisy and vibrates.

Release the bail handle to turn the mower off.

Remove the safety key and battery pack. Turn the

mower on its side and check the blade to ensure it

has not been bent or damaged. If the blade is

damaged, replace with a Black & Decker

replacement blade. If the underside of the deck is

damaged, return mower to a Black & Decker

Authorized service center

If there is no visible damage to the blade and the

mower still vibrates: Release the bail handle to turn

mower off, remove the safety key and battery pack

and then remove the blade. Rotate the blade

through 180 degrees and re-t. If mower still

vibrates, return the mower to an authorized Black &

Decker service center.

Mower not picking up

clippings.

Chute clogged. Release the bail handle to turn

mower off. Remove the safety key and battery

pack. Clear the chute of grass clippings.

Too much cut grass being cut. Raise the cutting

height of wheels to shorten the length of the cut.

Bag full. Empty bag more often.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you nd one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product avail-

able for separate collection.

Separate collection of used products and packag-

ing allows materials to be recycled and used again.

Re-use of recycled materials helps prevent

environmental pollution and reduces the demand

for raw materials.

Local regulations may provide for separate collection of elec-

trical products from the household, at municipal waste sites or

by the retailer when you purchase a new product.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker CLM3820 T1 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker CLM3820 T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info